Votos - 4, Puntuación media: 4.5
(
)
)
|
Resumen del manual
For the DVI cable connection, use a DVI to HDMI cable or DVI-HDMI (DVI to HDMI) adapter for video connection and the PC/DVIAUDIOINjacks for audio. xIf an external device such as a DVD / Blu-ray player / cable box / STB satellite receiver supporting a HDMI versions older than 1.3 is connected, the TV may operate abnormally (e.g. no screen display / no sound / annoying flicker / abnormal colour). xIf there is no sound after connecting an HDMI cable, check the HDMI version of the external device. If you suspect the version is older than 1.3, contact the provider of the device to confirm the HDMI version and request an upgrade. xIt is recommended you purchase an HDMI-certified cable. Otherwise, the screen may appear blank or a connection error may occur. HDMI OUTDVI OUTR-AUDIO-LAUDIO OUTWRPC INPC INDVD / Blu-ray player DVD / Blu-ray player RedWhite 8 English Using a Component (up to 1080p) or Audio/Video (480i only) Cable and Scart Cable Available devices: DVD, Blu-ray player, cable box, STB satellite receiver, VCR PPPRPBYCOMPONENT OUTVIDEO OUTAUDIO OUTR-AUDIO-LAUDIO OUTR-AUDIO-LEXTRGBWRYWRYWRWRRGBRBGYWRWRVCR / DVD VCRDVD / Blu-ray player RedRedWhiteWhiteYellowRedBlueGreen . In Ext. mode, DTV Out supports MPEG SD Video and Audio only. . To obtain the best picture quality, the Component connection is recommended over the A/V connection. 02 Connections English 9 Connections Connecting to an Audio Device Using an Optical (Digital) or Audio (Analogue) Cable or Headphone Connection Available devices: digital audio system, amplifier, DVD home theatre .DIGITALAUDIOOUT(OPTICAL) xWhen a digital audio system is connected to the DIGITALAUDIOOUT(OPTICAL)jack, decrease the volume of both the TV and the system. x5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH. xWhen the receiver (home theatre) is set to on, you can hear sound output from the TV’s optical jack. When the TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theatre receiver. When the source is a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is connected to the TV via HDMI, only 2 CH audio will be heard from the home theatre receiver. If you want to hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theatre. .HeadphonesH: You can connect your headphones to the headphones output on your set. While the headphones are connected, the sound from the built-in speakers will be disabled. xSound function may be restricted when connecting headphones to the TV. xHeadphone volume and TV volume are adjusted separately. OPTICALdigital audio system 10 English 02 Connections CONNECTIONS COMMON INTERFACE Slot To watch paid channels, the “CI or CI+ CARD” must be inserted. • If you don’t insert the “CI or CI+ CARD,” some channels will display the message “Scrambled Signal”. • The pairing information containing a telephone number, the “CI or CI+ CARD” ID the Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider. • When the configuration of channel information has finished, the message “Updating Completed” is displayed, indicating the channel list is updated. . NOTE • You must obtain a “CI or CI+ CARD” from a local cable service provider. • When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+ CARD” may cause damage to it. • Insert the “CI or CI+ CARD” in the direction marked on the card. • The location of the COMMONINTERFACEslot may be different depending on the model. • “CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer. • If you have any problems, please contact a service provider. • Insert the “CI or CI+ CARD” that supports the current antenna settings. The screen will be distorted or will not be seen. • When you are watching the satellite TV, remove the “CI or CI+ CARD” of terrestrial and cable. The screen will be distorted or will not be seen. Changing the Input Source Edit Name ¦ VCR/DVD/Cable STB/Satellite STB/PVR STB/ Source List AVReceiver/Game/Camcorder/PC/DVIPC/ DVI Devices/TV/IPTV/Blu-ray/HD DVD/DMA: Use to select TV or other external input Name the device connected to the input jacks to makesources such as DVD / Blu-ray players SOURCE your input source selection easier. / cable box / STB satellite receiver . When a PC with a resolution of 1920 x 1080 @ connected to the TV. 60Hz is connected to the HDMIIN1(DVI) port, ¦ TV/Ext./PC/AV/Component you should set to DVIPC mode under EditName. /HDMI1/DVI/HDMI2/HDMI3/ . When connecting an HDMI/DVI cable to the HDMI4/USB HDMIIN1(DVI) port, you should set to DVIPC or . In the SourceList, connected DVIDevices mode under EditName. inputs will be highlighted. . If an HDMI cable is connected to the . Ext. and PCalways stay...
Otros modelos de este manual:TV - UE32C6000RW (20.25 mb)
TV - UE32C6005RW (20.25 mb)
TV - UE32C6500UW (20.25 mb)
TV - UE32C6510UP (20.25 mb)