Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
Document Outline
- Contents
- HP Technical Support
- Configuration Information
- Install HP StorageWorks Clustered File System
- Contents of the HP Clustered File System Distribution
- Supported Operating Systems
- User Authentication
- Installation Procedure
- Installation Checklist
- 1. Set Up the DNS Hostname
- 2. Configure the Server for WINS Clients
- 3. Install a Firewall (Optional)
- 5. Reboot the Server
- 6. Install Emulex HBA API Libraries
- 7. Configure the Storage Array
- 8. Install the iSCSI Initiator (iSCSI Configurations Only)
- 9. Install HP or Third-Party MPIO Software (Optional)
- 9. Set Parameters for MPIO Software
- 10. Configure FC Switches
- 11. Create LUNs for the Membership Partitions and Modify Partition Tables
- 12. Log Into iSCSI Targets (iSCSI Configurations Only)
- 13. Run the mxcheck Utility
- 14. Install HP StorageWorks Clustered File System
- 1. Locate the file MxS_3.6.0.
.msi on the HP Clustered File System CD or in the directory where you downloaded the product. Be sure to install the version that corresponds to your operating system (32-bit or 64-bit). - 2. Double-click the file MxS_3.6.0.
.msi and run the Installation Wizard. By default, HP Clustered File System is installed...
- 1. Locate the file MxS_3.6.0.
- 15. Install Hardware Snapshot Software (Optional)
- 16. Configure the Cluster
- Configuration Information
- Connect to the Management Console
- General Settings Tab
- 1. Enter a name or description for this Cluster. The cluster name or description appears on the title bar of the HP Management C...
- 2. License. HP Clustered File System can be used with either a temporary or a permanent license, which is provided in a separate...
- 3. Secret Network Key. This password is required. It provides additional security for network communications among the cluster s...
- 4. Cluster Administrative Traffic Protocol. Select either multicast or unicast mode. Multicast mode is recommended; however, if your network configuration does not allow multicast traffic through the network, you can use unicast mode.
- SAN & Fencing Tab
- FibreChannel Switch-Based Fencing
- Web Management-Based Fencing
- 1. Remote Management Controller Vendor. Select the vendor for your Remote Management Controller.
- 2. Remote Management Controller ID. Specify how HP Clustered File System should identify the Remote Management Controller associated with each server. Use one of the following methods.
- 3. Remote Management Controller Access. HP Clustered File System needs to log into a user account on the Remote Management Contr...
- 1. Shared configuration. Select the appropriate options.
- 2. Fencing Action. When a server needs to be restricted from the SAN, HP Clustered File System can either power-cycle the server or shut it down. Select the method that you want to use.
- 1. SAN Switches. Specify the hostnames or IP addresses of the FibreChannel switches that are directly connected to the nodes in the cluster. Click Add, and then specify the hostname or IP address of the first FC switch.
- 2. SNMP Community String. The default SNMP community string for HP Clustered File System is private. If you want to use a custom...
- Storage Settings Tab
- 1. Membership Partitions. HP Clustered File System uses a set of membership partitions to control access to the SAN and to store...
- 2. Snapshot configuration. HP Clustered File System supports hardware array-based snapshots. If you want to use this capability, you will need to configure the snapshot method.
- Cluster Wide Configuration Tab
- 1. Add servers to the cluster. To specify the first server, click Add Server and type the IP address or hostname of the server on the Input form. Then click OK to add the server to the Address column.
- 2. Export the configuration. Click Select All to select all of the servers in the Address column. Then click Export. The Last Operation Progress column will display status messages as the configuration is exported to each server.
- 3. Start HP Clustered File System on the remaining servers. The servers to which you exported the configuration will still be se...
- Test the Fencing Configuration
- Install the Stand-Alone Management Console
- Install FS Option for Windows
- Uninstall HP Software
- Configure the Cluster from the Command Line
- Index