Votos - 1, Puntuación media: 4
(
)
)
|
Resumen del manual
Cords rated for less amperage may overheat. Care should be taken to arrange the cord so that it cannot be pulled or tripped over. SAVE THESE INSTRUCTIONS! OTHER CONSUMER SAFETY INFORMATION This product is intended for household use only. This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way. Use the iron on an ironing board. Ironing on any other surface may damage that surface. Do not iron or vertical steam clothes that are being worn. Do not use vertical steam in the direction of people or pets. 2 840165700 Ev02 5/1/07 4:05 PM Page 3 PARTS AND FEATURES Adjustable Steam Switch (see inset) Water Tank Opening Spray Nozzle Soleplate Power ON/Auto Shutoff Reset Button/Light Heel Rest Spray/Blast Buttons (see inset) Cord Water Window Temperature Control Dial Retractable Cord Cord Release Button (on select models) (on select models) Adjustable Steam Spray/Blast Buttons Blast Spray BEFORE FIRST USE • Steam vents should be cleaned before first use. • During the first use of the iron, it may appear to smoke. This will stop and does not indicate a defect or hazard. • To clean steam vents before first use, prepare iron for steam ironing, then iron over an old cloth for a few minutes while letting the iron steam. Press the Blast button several times to clean the vents. Then follow the Self-Cleaning instructions. • Many irons spit or sputter during the first few uses with tap water. This happens as the steam chamber becomes conditioned. This will stop after a few uses. 3 840165700 Ev02 5/1/07 4:05 PM Page 4 TO DRY IRON 1. Plug iron into outlet. 2. Turn Adjustable Steam Switch to Dry Iron O. 3. Turn Temperature Control Dial to desired temperature. Allow two minutes for iron to reach desired temperature. 4. To turn iron OFF (O), turn Temperature Control Dial to OFF (O) and unplug iron. TO STEAM IRON 1. Unplug iron. Turn Adjustable Steam Switch to Dry Iron O. Set iron upright on heel rest. 2. Using a cup, slowly pour tap water into water tank opening until MAX fill line has been reached. Do not fill iron directly from the faucet. 3. Plug iron into outlet. 4. Turn the Temperature Control Dial to desired fabric setting in the steam range. 5. Allow two minutes for the iron to reach desired temperature. 6. Set Adjustable Steam Switch to the recommended steam level. See the “Fabric Setting Chart.” 7. To turn iron off, set Adjustable Steam Switch to Dry Iron O. Turn the Temperature Control Dial to OFF ( O ). Unplug iron. 8. Empty water from the iron following directions in “Caring for Your Iron.” Water Please use ordinary tap water. If you have extremely hard water, alternate between tap water and distilled water for use in the iron. FABRIC SETTING CHART Steam Setting Temperature Setting Ironing Instructions Dry IronO Off Nylon, Acrylic Silk Polyester • • •• Dry iron using spray if necessary. Dry iron on the wrong side of the fabric. Iron while fabric is still damp. Steam Range Wool Rayon Cotton, Linen •• ••• ••• Use a press cloth and steam iron on the wrong side of fabric. Iron using spray if necessary. For cotton, iron while still damp or use spray. For linen, iron fabric on wrong side. 4 840165700 Ev02 5/1/07 4:05 PM Page 5 CARING FOR YOUR IRON Iron 1. The water tank of your iron should be emptied after each use. Turn Temperature Control Dial to OFF ( O ). Unplug the iron and hold over a sink. Slowly tilt pointed end of iron down over sink. Water will run out of water tank opening. 2. After iron has completely cooled, fully retract cord into iron or loop cord loosely around iron, as applicable, and store in an upright position. NOTICE: Do not store iron laying flat on soleplate. Soleplate 1. Never iron over zippers, pins, metal rivets, or snaps, as these may scratch the soleplate. 2. To clean occasional build-up on the soleplate, wipe with a sudsy cloth. Do not use abrasive cleansers or metal scouring pads. 3. Always store iron upright in the heel rest position. Self-Clean (on selected models) To keep the steam vents clear of any build-up, follow these instructions each time you iron using steam. 1. Turn Temperature Control Dial to OFF ( O ) and set Adjustable Steam Switch to Dry Iron O. Fill iron with water to 1.2 of its maximum capacity. 2. Turn Temperature Control Dial to Linen setting and let iron heat for 2 minutes. Keep Adjustable Steam Switch on Dry Iron O. 3. Turn Temperature Control Dial to OFF ( O ). Unplug iron and hold over a sink with soleplate facing down. 4. Turn Adjustable Steam Switch to MAX, while pressing Blast of Steam button often. Boiling water and steam will flow out of steam vents. Allow all water to drain from iron. 5. Gently move iron front to back to allow water to clean entire soleplate area. 6. If water still...
Otros modelos de este manual:Planchas - 169194 (211.35 kb)