Votos - 2, Puntuación media: 4.5
(
)
)
|
Resumen del manual
1). NOTE: When the equipment is switch off, always check that the knobs are in the closing position. If the flame should blow out accidentally, the safety valve will automatically stop the gas supply, after a few seconds. To restore operation, set the knob to the lighting point (large flame, fig. 1) and press. While cooking with fat or oil, pay the utmost attention as these substances can catch fire when overheated. WARNING: – Do not use sprays near the appliance in operation. – Do not place unstable or deformed pots on the burner, so as to prevent them from overturning or overflowing. – Always turn gas off if moving a pot away from the appliance. BURNERS POWER (MJ/h) POWER (Btu/h) O of pots Auxiliary 3.2 3000 10 - 14 cm Semi-rapid 6.3 6000 16 - 18 cm Rapid 11.6 11000 20 - 22 cm Wok 17.9 17000 24 - 26 cm 4 C -Cleaning C -Cleaning WARNING: – Before any operation, disconnect the appliance from the electric grid. – Do not clean the appliance while it is hot. Enameled Burner Caps The enameled burner caps must be washed with a sponge and soapy water or with a light detergent. WARNING: – Do not use abrasive or corrosive products. – Do not leave substances, such as lemon or tomato juice, salt water, vinegar, coffee and milk on the enameled surfaces for a long time. Stainless Steel The stainless steel parts should also be cleaned with soapy water and then dried with a soft cloth. WARNING: – Stainless steel can be stained if it remains in contact with highly calcareous water or aggressive detergents for an extended period of time. – Stainless Steel can also discolour if in contact with excessive heat. Burners and racks These parts can be removed to make cleaning easier. The burners must be washed with a sponge and soapy water or with a light detergent, wiped well and placed in their housing perfectly. After cleaning, check that the feeler of the safety valve, start-up electrode and the flame-dividing ducts are not clogged with soap or grime. The racks can be washed in the dishwasher. Gas taps WARNING: Lubrication of the gas taps must be carried out by specialized personnel, exclusively. In case of hardening or malfunctions in the gas taps, apply to the Customer Service. 5 D -Installation & Warnings D -Installation & Warnings NOTE: THE OPERATIONS INDICATED BELOW MUST BE FOLLOWED BY QUALIFIED PERSONNEL EXCLUSIVELY, IN CONFORMITY WITH THE REGULATIONS IN FORCE. THE MANUFACTURING FIRM REFUSES ALL RESPONSIBILITY FOR DAMAGES TO PEOPLE, ANIMALS OR OBJECTS, RESULTING FROM THE FAILURE TO COMPLY WITH SUCH PROVISIONS. The appliance is designed to be embedded into heat-resistant cabinetry. Cut a hole in the top of the cabinetry, with the dimensions indicated in fig. 3, at a distance of at least 50 mm from the appliance border to the adjacent walls. WARNING: – The surrounding cabinetry must resist a minimum temperature of 75°C. – The equipment must not be installed near inflammable materials, such as curtains, cloths, etc. ( Ref to Fig. 3 on page 8) MODEL L (mm) P (mm)...
Otros modelos de este manual:Placas - CGA 60 WOK (110.53 kb)
Placas - CGA 60 WOK (110.53 kb)
Placas - CGA 60 WOK (110.53 kb)
Placas - CGA 75 WOK (110.53 kb)