The time has been short, but we’ve made good use of it by improving upon existing models (that were already great to begin with) and by coming up with some incredible new ones too. Bikes for specific purposes and places, for people like you - with specific needs and desires. We welcome you now to take a look at our 2007 line. You’ll see that each model is a statement of our commitment to our customers – bicycle riders of all types and ages who are serious about riding, making the most of life an

To check for correct standover height, straddle the bike while wearing the kind of shoes in which you’ll be riding, and bounce vigorously on your heels. If your crotch touches the frame, the bike is too big for you. Don’t even ride the bike around the block. A bike which you ride only on paved surfaces and never take off-road should give you a minimum standover height clearance of two inches (5 cm). A bike that you’ll ride on unpaved surfaces should give you a minimum of four inches (7.5 cm) of

Tire pressure is given either as maximum pressure or as a pressure range. How a tire performs under different terrain or weather con di tions depends largely on tire pres sure. Inflating the tire to near its max i mum rec om mend ed pressure gives the lowest rolling resistance; but also produces the harshest ride. High pressures work best on smooth, dry pavement. Very low pressures, at the bottom of the rec om mend ed pressure range, give the best performance on smooth, slick terrain such as har

REGESITOR YOUR WARRANTY AT tness.com OR 2. COMPLETELY FILL OUT THE ATTACHED WARRANTY CARD (SEE BACK COVER) AND RETURN TO DIAMONDACK WITHIN 15 DAYS OF THE DATE OF PURCHASE. FAILURE TO COMPLY WITH THE WARRANTY ACTIVATION PROCEDURE MAY VOID THE MANFACTURER’S WARRANTY. Serial Number Location Serial Number Sticker Serial Number Sticker 2 _________________________________________________________________________________________ Dealer Address: ___________________________________________________________

7a & fig. 8). To apply enough clamping force, you should have to wrap your fingers around a frame tube for leverage, and the lever should leave a clear imprint in the palm of your hand. ! WARNING: Securely clamping the wheel takes considerable force. If you can fully close the quick release without wrapping your fingers around the seatstay or chainstay for leverage, and the lever does not leave a clear imprint in the palm of your hand, the tension is insufficient. Open the lever; turn the tensio

Press ENTER key to enter program set up mode. The message display will take you through the pro- Enter Age The message window will flash a message of “ENTER AGE”, then “AGE = XX” with the number 1. blinking. You may press 2. UP or DOWN keys to adjust the age. After age adjustment, the message display will switch to display “PRESS ENTER” to indicate3. next step. Press ENTER to accept and enter Weight adjustment. Enter Weight The message window will flash a message of “ENTER WEIGHT”, then “WEIGHT

Read it before you take the first ride on your new bicycle, and keep it for reference. AN IMPORTANT MESSAGE TO PARENTS: This Manual contains important safety information. For your child's safety, it is your responsibility to review this information with your child and make sure that your child understands all warnings, cautions, instructions and safety topics. We recommend that you periodically review and reinforce the information in this Manual with younger riders. GENERAL WARNING: Like any spo