to 25 min.) One DK-12 Active Infrared Sensor provides a 6’ x 4’ protection if a person or forklift stops in its pattern. BQj V'.V | > Presence DK-1E Detector for Automatic Doors Left Side Pattern Left Side Pattern (3’x4’) (4’x4') Single dip switch pattern selection allows the detector to adjust easily to any particular installation. B.E.A. Inc. 300 South Main Street Pittsburgh. PA 15215 USA Phone:412-782-5150 Fax:412-782-5154 Website: E-mail: sales@beainc.com Toll Free Numbers: US &

(198g) Contact Information BEA Inc. RIDC Park West 100 Enterprise Drive Pittsburgh PA, 15275 Phone +1.412.249.4100 Fax +1.888.523.2462 Toll Free 1-800.523.2462 BEA West 2401 Pine Street Los Angeles, CA 91767 Phone +1.909.596.3011 Fax +1.909.596.5411 Toll Free 1-877.232.9378 Bodyguard LO Linx 24 EAGLE COMPONENTS j Removable plug connector ^ Remote controlled receiver ^ Serial communication connector ^ LED (detection indication) ^ Sensitivity adjustment buttons ^ Antenna bracket front adj

2 Technical Specifications DESCRIPTION SPECIFICATION Frequency: 12 to 24 V AC: ± 10%: 12 to 24 V DC: -10% / +30%: 24.125 GHz Supply voltage: Mounting height: Normal: 7’; Maximum: 10’-0” Tilt angle: 0° to 90° vertical -15° to +15° lateral Detection area: Wide 13ft (W) x 6.5ft (D) Narrow 6.5ft (W) x 8.2ft (D) (supplied as optional) Minimum detection speed: 2 in/sec. (measured in axis) Power consumption: < 2 W Standard output relay: Max contact voltage 60 VDC / 125 VAC Max contact current 1 A (resi

These adjustments can be made with BEA’s universal remote control. Other accessories available for the Eagle include the false ceiling adapter (ECA), and the rain protection cover (ERA). PRELIMINARY TECHNICAL SPECIFICATIONS Frequency: 24.125 GHz Supply voltage: 12 to 24 V AC : ± 10% : 12 to 24 V DC : -10% / +30% : Mounting height: 16.5 feet Tilt angle: 0° to 90° vertical -30° to +30° lateral Detection area: 13.1 ft x 8.2 ft Minimum detection speed: 2in/sec. (measured in axis) Power consumption:

The logo is only printed on the surface of the plate. Embossing - This process requires the use of a special tool designed to punch the back of the face plate with the custom information. A special coating is added to the embossing process add a dramatic 3D effect to your push plate. Contact Information BEA Inc. RIDC Park West 100 ENTERPRISE DRIVE PITTSBURGH, PA 15275 PHONE 1-412-249-4100 FAX 1-888-523-2462 TOLL FREE 1-800-5 BEA INC BEA West 190 East Arrow Highway Suite A San Dimas, CA 9