LOC ON appears on the display and only local stations are available. When you turn it off both distance and local stations can be received. Note: The function is invalid in AM tuning. Selecting the Stored Station During radio mode, press ^/^ buttons on the RC or on the front panel to select the stored station upward/downward. MO/ST Selector During radio mode, you can press ST/AUDIO button on the remote control to select mono mode or stereo mode. Stereo reception is on when ST ON appears. It

Press and hold for 2 seconds to start automatic station searching. 3. MOD BUTTON Press it to select the mode: RADIO => AUX => DISC. 4. VOLUME KNOB Rotate VOLUME knob clockwise to increase the volume level; rotate anticlockwise to decrease the volume level. 8 5. INFRA RED SENSOR 6. SEL BUTTON Press SEL button repeatedly to select the audio setting: VOL => BAS => TRE => BAL => FAD => DSP = > LOUD. Press and hold for 2 seconds to set the equalizer setting. Rotate the VOLUME/MENU knob to se

For safety, it is strongly recommended to read this manual carefully before connecting, operating and/or adjusting the product and keep the manual for reference in the future. Table of contents Table of contents....................................................................................................................................................................................2 Important safeguards....................................................................................

When user releases the button, then seek stops when station is detected. VOL LAST - VOL ADJUST When VOL LAST is selected, the volume level adjusted by the user is selected whenever the power is on and off. When VOL ADJ is selected you can adjust the volume level that will be active whenever the power is on. 16 Disc operations Loading/Eject a disc • Open the front panel. Insert the disc with the printed side facing upward into the slot. Close the panel. The CD will play automatically. • Ope

For details, refer to the following illustrated installation methods. DIN FRONT-MOUNT (Method A) 1. Car dashboard 2. Sleeve 3. Screw 4. Nut 5. Spring washer 6. Screw 7. Metal strap 8. Flat washer 5 1. 3. 4. 5. Install the sleeve into the dashboard; ensure it is installed with the correct side and there are no obstacles (wires, dashboard elements, etc) for the unit installation. After installing the sleeve into the dashboard, bend tabs fitting to the size of the dashboard to fix t

You can select: AUTO: the TV system is auto switched according to the disc system. NTSC: this system is used in USA, Taiwan, Japan etc. PAL: this system is used in China, Europe, Hong Kong etc. • TV type 4:3 PS: When the unit connects to the normal TV set, the wide-screen image shows on the full screen, but some part is cut off. 4:3 LB: When the unit connects to the normal TV set, the wide-screen image shows and black bars appear on the top and bottom of screen. 16:9: Use this item when t

Press + or - button to adjust level of the selected sound mode: - VOL: 00, 02,......, 44, 46 - BASS/TREB: -6, -5,......, 0, +1, +2,......+ 5, +6 - BAL: 12L, 11L,......, L=R, 1R,......,12R - FAD: 12R, 11R,......, R=F, 1F,......, 12F NOTE: Adjustments to Bass and Treble will override any preset EQ (Preset Equalizer Curves). In each mode, the waiting time is about 5 seconds, and the waiting time is over, it returns to the last display mode of radio or disc playback mode. Menu mode Press the

BEEP OFF: no beep sound is heard. SEEK (for Tuner mode) 14 Select SEEK 1 or SEEK 2. Seek 1: In Radio mode rotate and hold PREV/NEXT knob. The radio will seek the next strong and clear frequency station. Repeat to seek more stations in your listening area with a strong signal. Seek 2: In Radio mode rotate and hold PREV/NEXT buttons for station search. The search will not cease until you release the knob. VOL LAST/ADJUST In this mode the unit will be turned on with the same volume level at

The zoom range is from 1/4 up to 4 (total 7 stages), according to the zooming intensity. Slow Motion Press SLOW button on the RC to perform slow motion of the video play. SF 1/2 up to 1/7 will be shown, according to the slowness. Cycle back to normal playback of press the Play/Pause button to resume. Multi-Angle View Press the ANGLE button on the RC to perform multi-angle playback. The numbers of angles change in sequential order. Note: The number of angles is different according to the dis

To stop auto storing, press this button again. When the auto-storage operation is completed, it will automatically play each found station for 5 seconds. After finishing 1 loop of memory scan, it will play the first memorized station in the current band. RDS function There are the PI, PS, TP, PTY, TA, AF data. PI: Program Identification Code - for identifying code. PS: Program Service Name Broadcast - station name data expressed in alphanumerically character. TP: Traffic Program Identificat