MC-6066-211501 OIL TENK 1 50 MC-6038-211506 HOUSING (L) 16 MC-6028-211502 TRIGGER 1 51 MC-6086-211501 REAL COVER 1 17 MC-6022-211502 SWITCH 1 52 MC-6228-211301 MOTOR GEAR BOX ASS'Y 18 MC-6024-211301 SPRING 1 53 MC-6022-211501 SWITCH 1 19 MC-6CY-08 RING 1 54 MC-6SDABB04-10 SCREW 20 MC-6079-211501 SPRING, BRAKE 1 55 MC-6011-211502 POWER CORD 1 21 MC-6073-211501 GEAR 1 56 MC-6043-840001 STRAIN RELIEF 22 MC-6059-210201 ADJUSTMENT COVER 1 57 MC-6059-855001 CORD GUARD 1 23

(Ne pas tirer jusqu’en fin de course, car cela pourrait endommager le demarreur.) Pour eviter l’usure du cordon de demarreur, retenir la poignee pendant qu’il se rembobine. A PUESTA EN MARCHA Y PARADA NOTA Tenga en cuenta que algo de fluido, especialmente aceite para la cadena, saldra de la sierra durante el transporte o almacenamiento. No coloque la sierra sobre superficies que desee mantener sin manchas. Los pasos 1 a 10 son para la puesta en marcha de un motor en frio. 1. Presione la bola del

Categorie C = 50 heures, B = 125 heure et A = 300 heures. PROGRAMME D’ENTRETIEN RELATIF AUX EMISSIONS ET LISTE DES PIECES GARANTIES PIECES D’EMISSION INSPECT BEFORE TOUTES LES 5 HEURES TOUTES LES 25 HEURES OU TOUTES LES 25 HEURES OU EACH USE NETTOYER TOUS LES ANS - REMPLACER TOUS LES ANS- NETTOYER ENSEMBLE FILTRE A AIR COMPREND : FILTRE ........................................................................................................... X ............................................ X ECRA

101414-01 Printed in U.S.A. Price $1.00 ELECTRIC CHAIN SAW SAFETY WARNINGS Make certain you read and understand all Safety Warnings on pages 2 and 3. Improper use of this chain saw can cause severe injury or death from fire, electrical shock, body contact with moving chain, or falling wood. BEFORE OPERATING SAW 1. Read and understand this owner’s manual before operating chain saw. 2. Watch what you are doing. Use common sense. Do not operate saw when you are tired. 3. Use chain saw for cutting w

¦ ¦¦¦¦¦Mix fuel outdoors where there are no sparks or flames. ¦ ¦¦¦¦¦Select bare ground, stop the engine, and allow it to cool before refuelling. ¦ ¦¦¦¦¦Loosen the fuel cap slowly to release pressure and to keep fuel from escaping around the cap. ¦ ¦¦¦¦¦Tighten the fuel cap securely after refuelling. ¦ ¦¦¦¦¦Wipe spilled fuel from the unit. Move 15 m (50 ft.) away from refuelling site before starting engine. ¦ ¦¦¦¦¦Never attempt to burn off spilled fuel under any circumstances. BASIC PRECAUTIONS

During felling operations, the safe distance should be a least twice the height of the largest trees in the felling area. During bucking operations, keep a minimum distance of (15 ft) 4.5 m. between workers. ¦¦¦¦¦Always cut with both feet on solid ground to prevent being pulled off balance. ¦¦¦¦¦Do not cut above chest height as a saw held higher is ¦¦¦¦¦Hold the saw firmly with both hands. Always keep your LEFT HAND on the front handle and your RIGHT HAND on the rear handle so that your body is

Do not wear loose-fitting clothing, which could be drawn into the engine or catch the chain or undergrowth. Wear overalls, jeans, or leggings made of cut-resistant material or ones that contain cut-resistant inserts. Secure hair so that it is above shoulder level. ¦ ¦¦¦¦¦Wear non-slip safety footwear and heavy-duty gloves to improve your grip and to protect your hands. ¦ ¦¦¦¦¦Wear eye (E), hearing (F), and head (G) protection when operating this equipment. PROPER GRIP ON HANDLES See Figures 17 a

• Use extreme caution when re-entering a previous cut. • Use low-kickback chain and guide bar supplied with this chain saw. Only replace these parts with chains and guide bars listed in this manual. • Never use dull or loose chain. Keep chain sharp and tensioned correctly. Saw Maintenance and Kickback Safety Follow maintenance instructions in this manual. Proper cleaning of saw along with chain and guide bar maintainance can reduce chances of kickback. Inspect and maintain saw after each use. Th

17957-A Printed in U.S.A. Price $1.00 HOMELITE EL12 AND EL16 ELECTRIC CHAINSAW SAFETY INFORMATION WARNINGS IMPORTANT: Make certain you read and understand all Safety Warnings on pages 2 through 4. Improper use of this chain saw can cause severe injury or death from fire, electrical shock, body contact with moving chain, or falling wood. BEFORE OPERATING CHAIN SAW 1. Read and understand this owner’s manual before operating chain saw. 2. Use chain saw for cutting wood only. Do not use for cutting

Damage to the chain brake will occur. 8 OWNER’S MANUAL OPERATING CHAIN SAW Continued FELLING A TREE (Cutting Down a Tree) WARNING • Avoid kickback. Kickback can result in severe injury or death. See Kickback, page 3 to avoid risk of kickback. • Do not fell a tree without ample skill or expert help. • Keep children, animals, and bystanders away from area when felling a tree. • If two or more persons perform bucking and felling operations at the same time, provide ample distance between operations