Also industrial applications; furniture frames, crates, pallets, and underwater applications. Features: Drives bulk nails, from 5d to 70d Balanced 2.46 lb. weight reduces fatigue Operates from 30 to 125 psig Drives nails into concrete, cinder blocks, and other hard materials Eliminates bent nails Depth-of-drive control for precise nail placement A10 Automatic Hammer A10 Applications: For dowel pins, leg glides, formica self-edging, t-molding, and upholstery tack strips in furniture an

Also industrial applications; aluminum window molding, vibrating cores from sand castings, and on-site finish molding. Features: • Delivers a single to over 1,000 blows per minute • Easily adjusts from the slightest tap to heavy impact blows • Balanced 2.19 lb. weight reduces fatigue • Interchangeable plastic, steel and aluminum tips for a variety of applications • Automatically hammers when in contact with work surfacerplate and hardened safety-resist granular abrasion For additional inf

(2.2 kg) Height: 70 inches (254 mm) Length: 73.8 inches (350 mm) Width: 2.8 inches (70 mm) Recharge Time: 7 hour Screw Drives/Charge: see chart on reverse side Fastener Capacity: 50 screws (one strip) Torque Delivered: 25 in-lbs Generated Noise: 74 dBA Vibration: less than 2.5m/sec2 Applications: Drywall (to wood or steel studs). Features and Benefits: ■ 74.4 volt battery provides the optimum balance of power, weight and run-time across the full range of screws ■ 4,000 RPM high-speed

Engineered for comfort and convenience, the DS200-14v cordless screw driver drives 1" to 2" screws. Tool Specifications: Voltage: 14.4 volts Battery Ampacity: 1700 mAh RPM: 2300 rev/min Weight: 4.9 lbs. (2.2 kg) Height: 10 inches (254 mm) Length: 13.8 inches (350 mm) Width: 2.8 inches (70 mm) Recharge Time: 1 hour Screw Drives/Charge: see chart on reverse side Fastener Capacity: 50 screws (one strip) Torque Delivered: 37 in-lbs Generated Noise: 74 dBA Vibration: less than 2.5m/sec2 Appl

Las distracciones pueden hacer que usted pierda el control. . Maintenez les spectateurs, enfants et visiteurs a l’ecart lorsque vous utilisez de l’outillage electrique. Toute distraction risque de vous faire perdre le controle de votre outil. Zone de travail Electrical Safety . Double insulated tools are equipped with a polarized plug (one blade is wider than the other.) This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it s

The DS202-14Vdrives 1" - 2" screws and is designed with a reverse switch to back out driven screws. Tool Specifications: Item Code: 3P0001N Voltage: 14.4 Battery Ampacity: 1700 mAh RPM: 2300 Weight: 5.2 lbs. (2.3 kg) Height: 10" (254 mm) Length: 13.8" (350 mm) Width: 2.8" (70 mm) Recharge Time: One hour Fastener Capacity: 50 screws (one strip) Torque Delivered. 43 In-lbs. Applications: Wood to wood, drywall (to wood or steel studs). Features and Benefits: 2,300 RPM high-torque moto

(2.3 kg) Height: 10" (254 mm) Length: 13.8" (350 mm) Width: 2.8" (70 mm) Recharge Time: One hour Fastener Capacity: 50 screws (one strip) Torque Delivered: 29 In-lbs. Applications: Drywall to wood and drywall to steel studs. Features and Benefits: Reverse switch - to back out driven screws Dynamic braking to conserve brush wear 4,000 RPM high-torque motor drives screws FAST! Patented clutch design is long-lasting durability Cordless power with two 14.4-volt slide batteries Drives 900-1

. Si el conjunto de bateria esta caliente, la luz roja dejara de parpadear se iluminara fija una vez que el conjunto de bateria se haya enfriado. Si el conjunto de bateria esta muy descargado, la luz roja dejara de parpadear y se iluminara fuja despues de que aumente el voltaje, normalmente transcurridos 30 minutos. Si despues de una hora la luz roja continua parpadeando, indica que el conunto de bateria esta defectuoso y debe ser reemplazado. La luz verde encendida indica que el conjunto de bat

Professional remodelers, contractors and DlYers will appreciate the convenience of the 3300 rpm collated screw system, which increases productivity by eliminating the need for handling loose screws. The DS300-AC has corded power to drive 11/4" - 3" screws into even the toughest work surfaces. With the built-in extension you can adjust tool to the proper height to speed productivity and save your back and knees. Applications: Ideal for decking, floor sheathing, underlayment and cement board.

The DS300-S2 comes complete with the DuraSpin collated screw feed system mounted on a screwdriver, a flooring extension, a rugged carrying case and two spare bits. Applications: Ideal for driving screws from 1-5/8"- 3" in length for exterior decking, floor sheathing and other wood-to-wood or wood-to-steel applications. Features and Benefits: • Patented SENCO DuraSpin feed system drives screws quickly and efficiently without jams or misfeeds. • Ergonomic design - May be used with a one-hande