Do not use the Chipper/Shredder while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating the Chipper/Shredder may result in serious personal injury. Dress properly. 5. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. Avoid accidental starting. 6. Be sure the Engine Ignition is in the “OFF” position before mov
It must be under WARNING! stood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied the operator. SAVE THESE INSTRUCTIONS PRODUCT DESCRIPTION HOPPER (1) MOTOR SUPPORT (26) POWER SWITCH (47) CIRCUIT BREAKER (49) POWER CORD (58) CHUTE (32) STAND ASSEMBLY WHEEL/AXLE ASSEMBLY FIGURE D BODY (13) SKU 92281 For technical questions, please call 1-800-444-3353. PAGE 10 ASSEMBLY INSTRUCTIONS NOTE: For additional information regarding the
(See Figure F.) 2. Insert the Hopper (1) into the Chute Cover (7), making sure to align the two mounting holes in the Hopper with the two mounting holes in the Chute Cover (7). (See Figure F.) 3. Place a Washer (3) on two Philip’s Head Screws (8). Then secure the Chute Cover (7) and Hopper (1) to the upper portion of the Shredder Housing (11) with the two Philip’s Screws. (See Figure F.) HOPPER (1) PHILIP’S HEAD SCREW (8) WASHER (3) CHUTE COVER (7) SHREDDER HOUSING (11) FIGURE F OPERATING INSTRU