Votos - 3, Puntuación media: 4 ( )

Fabricar: Heat Controller Tamaño del archivo: 708.5 kb Nombre del archivo: Idioma del manual:

The “WEEKLY 1” ON time starts flashing, and the fan speed and operating mode displays go off. 4 4 Press the SET TIME button to set the day’s first ON time. ^ : Use to advance the time forward. Ў : Use to turn the time back. (Press once to move the time 5 minute; hold down and the time will move 10 minutes at a time.) 5 5 Press the SET button. This registers the first ON time setting for the selected day. The ON time display stops flashing, and the “WEEKLY 1” OFF time starts flashing. TIMER MODE SET START/STOP CLOCK ADJUST SET TIME TEMP./DAY FAN CONTROL MASTER CONTROL DAY OFF ENERGY SAVE AM TIMER DAY WEEKLY ON OFF14 5 En-6 TIMER OPERATION (WEEKLY TIMER) Press the SET TIME button to set the day’s first OFF time. The earliest OFF time you can set is 5 minutes after the ON time. The latest OFF time is 11:55 p.m. on the subsequent day. 7 7 Press the SET button. This registers the first OFF time for the day, completing the “WEEKLY 1” settings for that day. The display switches to “WEEKLY 2”, and the day’s second ON time begins flashing. 8 8 Repeat the operations described in Steps 4 to 7 to set the second ON and OFF times for the day (the “WEEKLY 2” times). When you press the SET button after setting the “WEEKLY 2” OFF time, the system registers the “WEEKLY 2” settings for the day and returns you to the “WEEKLY 1” ON time setup process. (The first ON setting reappears and begins flashing.) You can review your settings by pressing the SET button. Each press moves you to the next setting, as follows. sWEEKLY 1 s WEEKLY 1 s WEEKLY 2 sWEEKLY 2 ON OFF ON OFF TIMER MODE SET START/STOP CLOCK ADJUST SET TIME TEMP./DAY FAN CONTROL MASTER CONTROL DAY OFF ENERGY SAVE AM PM TIMER DAY ON OFF16 7 If the timer is not set, press the SET button with the time display blank “ ”, and perform next operation. 9 9 Press the TEMP./DAY button to select another day for setup. The repeat steps 4 to 8 above to set the ON and OFF times for that day. 10 10 When you have finished setting all of the times, hold down the SET button for 3 seconds. The WEEKLY display flashes for 3 seconds while the new WEEKLY TIMER settings are registered, and then the clock display reappears. PM PM TIMER NEXT DAY DAY WEEKLY ON OFF2Next day’s WEEKLY settings ON OFF ON OFF Previous day’s WEEKLY settings NOTES: (1) If no time values are flashing, the clock display will automatically reappear after 15 seconds if no buttons are pressed. (2) A flashing time value indicates that the system is in time-setting mode. To return to the clock display you must hold down the SET button for 3 seconds. (3) You do not need to set values for both WEEKLY 1 and WEEKLY 2. If you wish, you can set values only for WEEKLY 1 or only for WEEKLY 2. (4) The allowable range for the day’s time settings is shown below. (5) If you set the OFF time to occur on the day following the ON time, the NEXT DAY caption appears on the display. Cannot set 5 min. Available range Cannot set5 min. 12:00 a.m. 12:00 a.m. En-7 TIMER MODE START/STOP CL...

Descargar ahora

Introduzca dos números de la imagen: