Votos - 3, Puntuación media: 4.3 ( )

Fabricar: Fujitsu Tamaño del archivo: 708.5 kb Nombre del archivo: Idioma del manual:

The ENERGY SAVE mode will be turned off. The ENERGY SAVE lamp goes off, and the unit will return to the former operat- ing conditions. About the ENERGY SAVE . The energy conservation mode (ENERGY SAVE) raises the set temperature slightly in the cooling mode and lowers the set temperature in the heating mode, using a computer program to economically control the operation of the unit. . If you press the ENERGY SAVE button while the air conditioner is on, it will change to the conservation mode. If you press the ENERGY SAVE button while the unit is in the timer mode (ON timer, WEEKLY timer), the unit will go into the conservation mode when the unit starts with the timer. . If you turn off the air conditioner while in the conservation mode, the mode will be shut off. . The temperature set on the remote controller will not change if the energy save mode is used. ¦ * When Heating ¦ When Cooling After the ENERGY SAVE button is pressed, the set tempera-After the ENERGY SAVE button is pressed, the set temperature will be lowered about 2 °F every 30 minutes. When it ture will be raised about 1 °F every 30 minutes. When it has has lowered a total of 4 °F, then it will hold that temperature. gone up a total of 2 °F, then it will hold that temperature. 4°F 2°F Ў Set to the ENERGY SAVE mode. 30 min. 30 min. 1°F 2°F ^ Set to the ENERGY SAVE mode. En-11 ADJUSTING THE DIRECTION OF AIR CIRCULATION Instructions relating to heating (*) are applicable only to “HEAT & COOL MODEL” (Reverse Cycle). Begin air conditioner operation before performing this procedure. . Always use the remote controller’s AIR FLOW DIRECTION SET button to ad- just the UP/DOWN air flow direction flaps. Attempting to move them manu- ally could result in improper operation; in this case, stop operation and restart. The flaps should begin to operate properly again. . When used in a room with infants, chil- dren, elderly or sick persons, the air flow direction and room temperature should be considered carefully when making settings. TIMER MODE SET ZONE START/STOP CLOCK ADJUST SET TIME TEMP./DAY FAN CONTROL MASTER CONTROL 21DAY OFF ENERGY SAVEFig. 6 1234 SWING OPERATION Begin air conditioner operation before performing this procedure. To Select SWING Operation Press the AIR FLOW DIRECTION SWING button. The AIR FLOW DIRECTION SWING lamp (orange) will light. In this mode, the UP/DOWN air flow direction flaps will swing automatically to direct the air flow both up and down. To Stop SWING Operation Press the AIR FLOW DIRECTION SWING button once again. The AIR FLOW DIRECTION SWING lamp will go out. Air flow direction will return to the setting before swing was begun. TIMER MODE SET ZONE START/STOP CLOCK ADJUST SET TIME TEMP./DAY FAN CONTROL MASTER CONTROL DAY OFF ENERGY SAVE About Swing Operation . The range of swing is relative to the currently set air flow . If the swing range is not as desired, use the remote con- direction. troller’s AIR FLOW DIRECTION SET button to change the range of swing. . The S...

Descargar ahora

Introduzca dos números de la imagen: