Iniciar sesión:
Clasificado: Nombre ↑   Descargas   Tarifa   Tamaño ↑  
Descargado: 0   Tamaño del archivo: 2 mb   Fabricar: Chicago Electric  
Categoría: Jig Saw y
@name

Page 14 3. Turn the Knob (1) and remove the Plastic Cover (2). (See Figure F.) 4. Remove the threephillips Screws (33) located on the left side of the Body (32). (See Figure G.) SCREW (#33) SCREW (#33) SCREW (#33) BODY (#32) FIGURE G FIGURE F KNOB (#1) PLASTIC COVER (#2) 5. Depress the Depth Control Lever (52) and lower the Base (24) so that the Inner Cover (7) and be removed. (See Figure H.) Depth Control Lever (52) hidden from view. INNER COVER (#7) Base (24) FIGURE H SKU 94362 For technical q

Descargado: 1   Tamaño del archivo: 1 mb   Fabricar: Chicago Electric  
Categoría: Jig Saw y
@name@name

Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual. Assembly: Installing the Blade Be sure the tool is unplugged from its 1. power source. Wear heavy duty work gloves. Shoe Plate (44) Chuck (8) Set Screws (38) Select a Blade that is appropriate 2. for the task at hand. See the Blade Selection Chart on page 14 for suggested blade size and type. Rotate the Chuck (8) 3. counterclockwise to open it. Hold it in

Descargado: 4   Tamaño del archivo: 1 mb   Fabricar: Chicago Electric  
Categoría: Jig Saw y
@name

If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. Keep cutting tools sharp and clean.f. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. Use the power tool, accessories and g. blades etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could res

Descargado: 4   Tamaño del archivo: 2 mb   Fabricar: Chicago Electric  
Categoría: Jig Saw y
@name

5. KEEP CHILDREN AWAY. All visitors should be kept safe distance from work area. 6. MAKE WORKSHOP KID PROOF with padlocks, master switches, or by removing starter keys. 7. DON’T FORCE TOOL. It will do the job better and safer at the rate for which it was designed. 8. USE RIGHT TOOL. Don’t force tool or attachment to do a job for which it was not designed. SAFETY SETUP OPERATION MAINTENANCE Table A: RECOMMENDED MINIMUM WIRE GAUGE FOR EXTENSION CORDS (120 VOLT) NAMEPLATE AMPERES (at full load) EXT

Descargado: 1   Tamaño del archivo: 3 mb   Fabricar: Chicago Electric  
Categoría: Jig Saw y
@name

All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions and replacement parts, please call 1-800-444-3353 THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please complete the owner’s record below: THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please complete the owner’s record below: ________





Categoría