Iniciar sesión:
Clasificado: Nombre ↑   Descargas   Tarifa   Tamaño ↑  
Descargado: 7   Tamaño del archivo: 4 mb   Fabricar: Eagle Group  
Categoría: equipamiento barco
@name

NOTE: For optimum operation, the portable transducer should be adjusted so that it is parallel to the ground. For more information on this, see the earlier segment on Transducer Orientation and Fish Arches. 29 Operation KEYBOARD BASICS The unit sounds a tone when you press any key. This tells you the unit has accepted a command. Numbers in the following photos correspond to key explanations in the following pages.: 4 2 3 1 1 2 3 4 Cuda 128 and Cuda 168EX Sonars, front view, each showing screen a

Descargado: 63   Tamaño del archivo: 4 mb   Fabricar: Eagle Group  
Categoría: equipamiento barco
@name

128, Cuda. 128 Portable, Cuda. 168, Cuda. 168EX Fish-finding & Depth Sounding Sonars Installation and Operation Instructions Copyright © 2002 Eagle Electronics All rights reserved. Eagle® is a registered trademark of Eagle Electronics Marine-Tex. is a trademark of Illinois Tool Works Inc. Eagle Electronics may find it necessary to change or end our policies, regulations, and special offers at any time. We reserve the right to do so without notice. All features and specifications subject to chang

Descargado: 7   Tamaño del archivo: 4 mb   Fabricar: Eagle Group  
Categoría: equipamiento barco
@name

feature must be turned on for fish alarms to work. To turn Fish I.D. on, press MENU until the FISH ID menu appears. Press UP ARROW to select ON, then press PWR. Then, press MENU until the FISH ALARM menu appears. Press UP ARROW to select ON, then press PWR. To turn off the fish alarm without turning off fish symbols, press MENU DOWN until FISH ALARM appears. Press DOWN ARROW to select OFF, then 45 press PWR to clear the menu. Repeat the above steps to turn the alarm back on, but press UP ARROW t

Descargado: 11   Tamaño del archivo: 4 mb   Fabricar: Eagle Group  
Categoría: equipamiento barco
@name

Attach the optional TMB-S bracket to the transducer as shown in the following figure, using the hardware supplied with the transducer. (Note: The internal tooth washer is supplied with the TMB-S.) Internal tooth washer TMB-S bracket Bolt Nut Flat washer Attach motor mounting bracket to transducer. 2. Slide the adjustable strap supplied with the TMB-S through the slot in the transducer bracket and wrap it around the trolling motor. Position the transducer to aim straight down when the motor is in





Categoría