Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
2. Be sure all shields are properly in place. 3. Check for and remove any foreign objects in the mixer hopper and discharge opening. 4. Check to see that drain plugs are installed and that the door is closed. 5. Be sure no one is inside the mixer. 6. Test run the mixer. a. Make sure mixer is empty, then start the mixer. b. Run for at least five minutes. c. Raise and lower the door several times. d. Turn off mixer and lock out power. e. Check the mixer drive components to be sure they are not abnormally hot. Refer to Inspection and Adjustment section for proper alignment and tension settings. If any of these items are not running as indicated, immediately repair or contact your service representative. Always refer to Operating Safety Precautions before operating or servicing the mixer. KUHN KNIGHT INC. 1501 West 7th Ave. Brodhead, WI 53520-0167 701 Cherry Ave. Greeley, Co. 80632 3000STOPR005810R082503 MIXER OPERATION Always refer to Operating Safety Precautions and Safety Decal sections of this manual before operating this mixer. OPERATION GENERAL The Reel Auggie was designed for blending dairy and beef rations. Most commonly used ingredients, including limited amounts of dry stem hay, can be mixed quickly and uniformly in this mixer. If you have questions regarding your dairy feed ration or have other applications, please consult Kuhn Knight Inc. The Reel Auggie’s mixing performance can vary according to the differences in materials, loading sequence and unloading methods. Some general guidelines should be understood before operating the Reel Auggie. When you see this Hay Maxx logo that means there are special and specific Hay Maxx operation instructions. The HAY MAXX System is designed to start processing hay before it enters the mixing chamber. This is an efficient way to add long stem hay to the ration. The hay pan holds the hay in position, while the auger begins to process the hay with the aid of hard edge knives and shear angles. The hay pan, with backstop, aggressive auger knives, and shear angles, work in combination to tear hay apart faster for more even mixing. SAFETY When the mixer is in operation it has many moving parts which could cause severe injury or death to persons coming in contact with these parts. To help avoid serious accidents, the following precautions should always be followed: DANGER: NEVER HAND FEED MATERIALS into mixer while it is running, always stop mixer and lock out power before hand loading materials. Rotating reel and augers inside mixer may not be visible from the loading point, and may cut or grab hands, clothing, or material being loaded, causing severe injury. DANGER: NEVER PUT ARMS OR FEET INSIDE unit, or climb on or in the mixer while it is running. Never allow anyone to position themselves over or near the top of the mixer while it is running. Rotating reel and augers can grab clothing or create pinch points which can cause severe injury or death to the operator or bystanders. Always stop mixer and lock o...
Otros modelos de este manual:Mezcladoras - 3000 SERIES 3015 (384.42 kb)
Mezcladoras - 3000 SERIES 3015 (384.42 kb)
Mezcladoras - 3000 SERIES 3020 (384.42 kb)
Mezcladoras - 3000 SERIES 3020 (384.42 kb)