Votos - 3, Puntuación media: 3.7
(
)
)
|
Resumen del manual
Replace any damaged or worn decal. Once any part of a decal becomes non-readable, it should be replaced. The part numbers for the decals are located in the lower RH corner of the decal, and listed in this manual on the following pages. Replacement decals may be ordered through your dealer or the address below. When replacing decals, be sure the surface area is clean and dry, peel the backing off the decal, and apply to the Mixer. Be sure to wipe with a clean cloth to rub out all air bubbles to assure a good seal. For best adhesion decals should be applied in temperatures of 50° (f) or warmer. Complete sets of decals (including information decals) can be ordered by using the following part numbers: UNIT PART NO. 3015 174-633 3020 174-630 3025 174-647 3030 174-650 3036 173-361 3042 173-362 3050 174-636 3060 174-639 3070 174-702 3095 175-013 3000STOPR005810R082503 SAFETY SAFETY DECALS Immediately replace all worn or damaged Safety Decals (listed on these pages). Please supply the unit’s serial number with the order. Figure A WARNING, STAY CLEAR OF POWER DRIVEN PARTS Part Number 170-849 2 Required: 3015 & 3020 MODELS 2 Required: 3025 & 3030 MODELS 3 Required: 3036 & 3042 MODELS 3 Required: 3050, 3060, 3070 & 3095 MODELS Figure B DANGER, ROTATING AUGERS INSIDE Part Number 171-820 4 Required ALL MODELS Figure C SAFETY INSTRUCTIONS Part Number 171-911 1 Required ALL MODELS KUHN KNIGHT INC. 1501 West 7th Ave. Brodhead, WI 53520-0167 701 Cherry Ave. Greeley, Co. 80632 3000STOPR005810R082503 SAFETY SAFETY DECALS Immediately replace all worn or damaged Safety Decals (listed on these pages). Please supply the unit’s serial number with the order. Figure D WARNING, DO NOT OPERATE UNLESS SHIELDS ARE IN PLACE Part Number 171-913 1 Required ALL MODELS Figure E WARNING, LIFTING INSTRUCTIONS Part Number 172-820 1 Required ALL MODELS Figure F DANGER, DO NOT OPERATE, SHIELD MISSING Part Number 171-915 2 Required ALL MODELS 3000STOPR005810R082503 SAFETY SAFETY DECALS Immediately replace all worn or damaged Safety Decals (listed on these pages). Please supply the unit’s serial number with the order. Figure G DANGER, DO NOT HAND LOAD Part Number 171-947 4 Required ALL MODELS Figure H BEWARE WHILE LOADING WITH A BUCKET LOADER Part Number 171-948 1 Required ALL MODELS Figure I DANGER, KEEP AWAY, ROTATING DRIVE LINE Part Number 172-786 1 Required: 3036 & 3042 MODELS 1 Required: 3050, 3060, 3070 & 3095 MODELS Figure J DANGER, DO NOT OPERATE SHIELD MISSING Part Number 173-078 1 Required: 3036 & 3042 MODELS 1 Required: 3050, 3060, 3070 & 3095 MODELS KUHN KNIGHT INC. 1501 West 7th Ave. Brodhead, WI 53520-0167 701 Cherry Ave. Greeley, Co. 80632 3000STOPR005810R082503 SAFETY SAFETY DECAL PLACEMENT ILLUSTRATIONS MODEL 3015 Shields removed for illustrative purposes 3000STOPR005810R082503 SAFETY SAFETY DECAL PLACEMENT ILLUSTRATIONS MODEL 3020 Shields removed for illustrative purposes KUHN KNIGHT INC. 1501 West 7th Ave. Brodhead, WI 53520-0167 701 Cherry Ave. Greeley, Co. 80632 3000...
Otros modelos de este manual:Mezcladoras - 3000 SERIES 3015 (384.42 kb)
Mezcladoras - 3000 SERIES 3015 (384.42 kb)
Mezcladoras - 3000 SERIES 3020 (384.42 kb)
Mezcladoras - 3000 SERIES 3020 (384.42 kb)