Votos - 2, Puntuación media: 3.5 ( )

Fabricar: Sony Tamaño del archivo: 266.34 kb Nombre del archivo: Idioma del manual:

Otros manuales para este modelo:

estéreo - MHC-RG110 (288.76 kb)

1 Press TAPE A/B repeatedly to select deck A or B. 2 Press Z. 3 Insert a tape in deck A or B with the side you want to play/record facing forward. With the side you want to play/record facing forward. 16GB Playing a tape Playing a tape You can use TYPE I (normal) tape. 1 Load a tape. To play both decks in succession, press PLAY MODE on the remote repeatedly until “RELAY” (Relay Play)* appears in the display. 2 Press H (or N on the remote). The tape starts playing. * After the playback of the front side of deck A, deck B plays the front side, then stops. Other Operations To Do this Stop play Press x. Pause Press X. Press again to resume play. Fast-forward Press m or M. or rewind Remove Press Z. the cassette Searching for the beginning of the current or the next track (AMS)* To go forward Press > during playback. “TAPE A (or TAPE B) >>> +1” appears. To go back Press . during playback. “TAPE A (or TAPE B) <<< –1” appears. * AMS (Automatic Music Sensor) Note The AMS function may not operate correctly under the following circumstances: – When the unrecorded space between songs is less than 4 seconds long. – When the system is placed near a television. Tape 17GB Recording to a tape Recording to a tape —CD Synchro Recording/Recording Manually You can record from a CD, tape (or connected components) or radio. You can use TYPE I (normal) tapes. The recording level is adjusted automatically. Steps Recording from a CD (CD Synchro Recording) Recording from a CD/tape/radio manually 1 Load a recordable tape into deck B. 2 Press CD. Press CD, TAPE A/B or TUNER/BAND. 3 Load the CD you want to record. Load the CD or tape (or other music source), or tune in the station you want to record. 4 Press CD SYNC. Press REC PAUSE/START. Deck B stands by for recording. “REC” flashes. 5 Press REC PAUSE/START. Recording starts. Press REC PAUSE/START, and then start playing the desired source to record. To stop recording Note You cannot listen to other sources while recording. Press x. Tip For recording from the radio: If noise is heard while recording from the radio, move the respective antenna to reduce the noise. 18GB Timer-recording radio programs Timer-recording radio programs You can record a preset radio station from a specified time. To timer-record, you must first preset the radio station (see “Presetting radio stations” on page 13) and set the clock (see “Setting the clock” on page 10). 1 Tune in the preset radio station (see “Listening to the radio” on page 15). 2 Press CLOCK/TIMER SET on the remote. “DAILY SET” appears. 3 Press . or > on the remote repeatedly to select “REC SET”, then press ENTER on the remote. “ON” appears and the hour indication flashes in the display. 4 Set the time to start recording. Press . or > on the remote repeatedly to set the hour, then press ENTER on the remote. The minute indication starts flashing. Press . or > on the remote repeatedly to set the minute, then press ENTER on the remote. 5 Repeat step 4 to set the time to stop recording. The start time appears, followed by the stop time, the preset radio station to be recorded (e.g., “TUNER FM 5”), then the original display appears. 6 Load a recordable tape into deck B. 7 Press ?/1 to turn off the system. When the recording starts, the volume level is set to minimum. Other Operations To Do this Check the Press CLOCK/TIMER SELECT setting on the remote and press . or > on the remote repeatedly to select “REC SELECT”, then press ENTER on the remote. Change the Start over from step 1. setting Cancel the timer Press CLOCK/TIMER SELECT on the remote and press . or > on the remote repeatedly to select “TIMER OFF”, then press ENTER on the remote. Notes • If the system is on at the preset time, the recording will not be made. • When you use the Sleep Timer, Timer-recording and Daily Timer will not turn on the system until the Sleep Timer turns it off. • You cannot activate the Daily Timer and Timer- recording at the same time. Tape 19GB Sound Adjustment Using the sub woofer (MHC-GX40 only) You can use the sound of the sub woofer to suit the sound source. Press ON/OFF on the sub woofer. The indicator lights up while the sub woofer turns on. Press the button again to turn off the sub woofer. Tip You can use VOLUME (VOL – or + on the remote) to adjust the volume of the sub woofer linked to the front speakers. Adjusting the sound You can reinforce the bass and create a more powerful sound. Press GROOVE. “GROOVE” appears in the display and the volume switches to power mode. Press the button again to cancel GROOVE. Selecting the sound effect Selecting the effect from the music menu Press MUSIC EQ, MOVIE EQ or GAME EQ (or EQ – or + on the remote*) repeatedly to select the preset you desire. The preset name appears in the display. See the chart “Sound effect options”. * You can select all of the effects in order. To cancel the effect Press EFFECT ON/OFF (or ON/OFF on the remote). Sound effect options “SURR” appears if you select an effect with surround effects. MU...

Descargar ahora

Introduzca dos números de la imagen: