Manual de usuario Yamaha, modelo PM5D
Fabricar: Yamaha
Tamaño del archivo: 1.06 mb
Nombre del archivo:
Idioma del manual:
|
 
|
|
|
Enlace gratuito para este manual disponible en la parte inferior de la página
Otros manuales para este modelo:
Resumen del manual
The graph immediately below the button shows the approximate response of the EQ. You can drag the graph to edit the response of the EQ, or hold down the key ( key) of your computer keyboard and click the graph to reset it to a flat response. BCOMP (Compressor) Switches the compressor on/off. When the compressor is on, the GR meter immediately below the button shows the amount of gain reduction. CINSERT Enables/disables the insert-out that is patched in the PM5D’s INSERT PATCH screen (OUTPUT PATCH function). DDELAY Switches the delay on/off. You can also edit the delay time by dragging the numeric value located immediately below the button up or down EChannel number Indicates the number of the MIX channel corresponding to this module. You can double- click this number to open the Selected Channel window for this channel. PM5D Editor Owner’s Manual 13 6 6 8 9 J K L M FMTRX (Send level to MATRIX buses) These bar graphs indicate the send levels of the signals Pre/on (green) sent from the MIX channel to each MATRIX bus. You can also adjust the send levels by dragging a bar graph Pre/off (green) to left or right. Post/on (yellow) The bar graph display will change as follows according to the send position (pre/post) and on/off status of the Post/off (yellow) signal sent from the MIX channel to the MATRIX buses. GTO ST (To STEREO) This is an on/off switch for the signal sent from the MIX channel to the STEREO bus. HPAN Sets the panning of the signal sent from the MIX channel to the STEREO bus. IVARI/FIXED Indicates the type (VARI or FIXED) of the currently selected MIX bus. (This parameter is for display only. You cannot switch between VARI and FIXED from within PM5D Editor.) If surround mode is enabled, MIX buses that are assigned as surround buses are displayed with the name of the surround channel (L, R, Ls, Rs ...), and the other MIX buses are displayed as “FIXED.” JSELECT Selects the MIX channel for which you want to make settings. This is linked with the MIX [SEL] keys in the MIX section of the PM5D panel. However it will no longer be linked if you turn Channel Select off (. p.2) in the System Setup window. KON Switches the MIX channel on/off. LFader Adjusts the output level of the MIX channel. The current fader value is shown in the numeric box immediately below the fader. The level meter at the right of the fader shows the output level of the signal. The numbers and alphabetical letters at the right of the fader indicate the DCA group and mute groups to which that channel belongs, and show the Recall Safe and Mute Safe status of the channel. (For the significance of the numbers and alphabetical letters, see . p.8). MCUE This button cue-monitors the signal of the MIX channel. This is linked with the MIX [CUE] keys in the MIX section of the PM5D panel. PM5D Editor Owner’s Manual 14 MATRIX window MATRIX window PM5D Editor Owner’s Manual 15 1 1 3 4 5 6 7 8 9 J K AMIX (Send levels from the MIX channels to the MATRIX bus) Here you can view and edit the send levels of the signals sent from each MIX channel to the MATRIX bus. The method of operation and the meaning of the display are the same as for (6) MTRX in the MIX window (. p.14). BSTEREO (Send levels from the STEREO channels to the MATRIX bus) Here you can view and edit the send levels of the signals sent from the STEREO A/B channels to the MATRIX bus. The method of operation and the meaning of the display are the same as for (6) MTRX in the MIX window (. p.14). CChannel number Indicates the number of the MATRIX channel corresponding to this module. You can double-click this number to open the Selected Channel window for this channel. DEQ (Equalizer) Switches the EQ on/off. The graph immediately below the button shows the approximate response of the EQ. You can drag the graph to edit the response of the EQ, or hold down the key ( key) of your computer keyboard and click the graph to reset it to a flat response. ECOMP (Compressor) Switches the compressor on/off. When the compressor is on, the GR meter immediately below the button shows the amount of gain reduction. FINSERT Enables/disables the insert-out that is patched in the PM5D’s INSERT PATCH screen (OUTPUT PATCH function). GDELAY Switches the delay on/off. You can also edit the delay time by dragging the numeric value located immediately below the button up or down HSELECT Selects the MATRIX channel for which you want to make settings. This is linked with the MATRIX [SEL] keys in the MATRIX section of the PM5D panel. However it will no longer be linked if you turn Channel Select off (. p.2) in the System Setup window. ION This switches the MATRIX channel on/off. This is linked with the MATRIX [ON] keys in the MATRIX section of the PM5D panel. JFader This adjusts the output level of the MATRIX channel. The current fader value is shown in the numeric box immediately below the fader. The level meter at the right of the fader shows the output level of the signal. The numbers and alphabetical let...
Otros modelos de este manual:
Instrumentos Musicales - PM5D-RH (1.06 mb)
)
