This will cause some monitors to go into standby mode or switch off. The video signal can be re-enabled by selecting a computer using ‘HOTKEYs’ and ‘TAB’ or ‘HOTKEYs’ and ‘1’ (or ‘HOTKEYs’ and ‘2’ on the AdderLink Gold) . AdderLink Installation and Use Page 35 ‘HOTKEYs’ and ‘L’ - Disconnects the AdderLink XR’s keyboard and mouse from the computer that they are controlling and switches off all the red status lights. The video signal is switched off. If a password has not been set then the AdderLi

Refer to the list of supported drivers in section 2.1. AdderLink supports VGA/SVGA/XGA/XGA2 type monitors, but does not support the automatic detection features available with some ‘plug and play’ monitors and video cards. If you have this type of video card and monitor, you should select the video mode manually instead of relying upon the automatic detection feature. The sound quality of the AdderLink Gold’s audio speaker channels is maximised by setting the maximum possible audio output level

When you first plug in your AdderLink you will probably notice that the picture appears blurred or distorted or does not appear at all. The picture quality is maximised by adjusting the video compensation setting. To do this use the following procedure. STEP 1 Enter video compensation mode by pressing the HOTKEYS together with f ffon the keyboard connected to the XR receiver unit. The HOTKEYS are those that were set using the option switches (CTRL + ALT by default). For example, assuming the def