0 dBV = 1 V rms. Peak Indicator Threshold: Line Input to Aux Send: 2. Power ratings are for each channel, -10 dBV (0.310 volts) at minimum gain 46 dB both operating, unless noted. Line Inputs, Mic Input to Line Output: 3. 120-volt ac line voltage. Number: 54 dB Power Output, Left and Right Master Six mono; two stereo Line Input to Line Output: Amplifiers, Type/Connector: 36 dB 4 Ohms: High impedance, unbalanced, Mic Input to Tape Record Output: 250 watts '/»-inch phone jacks 54 dB 8 Ohms

It’s the Formula One of power mixers, so it’s hardly surprising that the PowerMate has won numerous awards and come out on top in countless comparative tests. But aside from its quality, it’s the fact that it matches perfectly the needs of its users that makes the PowerMate the outstanding solution for a wide range of professional sound reinforcement applications. Now, after many extraordinarily successful years, the PowerMate has undergone a metamorphosis from which it emerges, more powerful, m

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacture’s instructions. 8. Do not i

Vergessen Sie einfach Anpassungs- und Verkabelungsprobleme von Mischpult, Verstarker, Effektteilen und Equalizeren. Hier haben Sie ein Gerat in dem alles optimal aufeinander abgestimmt ist. Durch die ergonomische Pultform und die ubersichtlich, strukturierte Anordnung der Bedienteile haben Sie immer alles im Blick und konnen schnell und problemlos auf jedes Detail zugreifen. Um schlechte Lichtverhaltnisse im Einsatz auszugleichen, ist eine Buchse zum Anschlu. einer Schwanenhalslampe vorgesehen.

38. AUX3/4 POST As already previously described, this switch allows determining whether Pre- or Post-Fader signals are present at the AUX3/4 channel. The corresponding yellow LED signals when the switch is engaged and all input channel AUX3/4 controls are assigned post fader. 39. FEEDBACK FILTER The feedback filter is a very narrow banded notch filter, which is only active in a range that is extremely susceptible for acoustical feedback. The FEEDBACK filter rotary control sets the corresponding

The two 18-Bit digital processors offer a total of 198 high-quality effect combinations in well-known Dynacord-quality, but employing new 32-Bit algorithms. Pre Outs • Master A and B, Mono, subwoofer out with low-pass-filter, record send control • perfect headphones control via PFL/PGM/Mix (with specific 20 mm transition-fader Power Amplifier • 2 x 300 watts/4 Q • LpN-processor • Up to three 8 Q loudspeakers on a single channel • 7-Band graphic Master-EQ • Power Amp In Case • Lightweight (on

To learn more about every aspect of the software, please read the following parts of this manual carefully. 7.4.2 Menus And The Toolbar File Menu -Create a new file -Open an already existing file -Save a file -Save an already existing file under a new name -Print all parameters of the momentarily opened file -Preview of the page to print -Printer settings -Open the last modified file -Quit the program 7-2 SOFTWARE EDITOR DRM 4000 View Menu -Change the status of the symbol bar - visible / invisib

Select Omni if commands from all channels should be accepted. Select Off if the effect unit should not be controlled via MIDI. Select the setting 0 -127 if using MIDI devices that start counting program change commands from 0. Select the setting 1 -128 if using MIDI devices that start counting program change commands from 1. Table 3-16: FX Control Setup parameter DEVICE SETUP This dialog can be used for editing system parameters and checking system properties. Some menu entries (e.g. Display Bri

Es gibt aber auch symmetrische dynamische Mikrofontypen, die besonders empfindlich sind und eventuell durch die Phantomspannung beschadigt werden konnten. Entnehmen Sie bitte nahere Informationen den Bedienungsanleitungen der von Ihnen verwendeten Mikrofone. Sicherheitshalber sollten Sie stets darauf achten, da. die PHANTOM POWER ausgeschaltet ist , wenn symmetrische dynamische Mikrofone an die Mikrofoneingangsbuchsen angeschlossen werden. Sie vermeiden damit eine mogliche Beschadigung dieser be

27 - SIG/PK The stereo SIG/PK indicator function provides independent analysis of left and right channel audio signals. The respective highest level reading is indicated, assuring that neither one is already driven into clipping. For further information on how to use this indicator most efficiently, please refer to the description of the monaural channel’s identical feature. 28 - FADER The channel fader is used to simultaneously adjust both levels (volumes) of the stereo signal. Functioning and