Votos - 3, Puntuación media: 4 ( )

Fabricar: Seagate Tamaño del archivo: 116.08 kb Nombre del archivo: cuda7200ig.pdf Idioma del manual:

You can get this free disc drive installation software from our web site at or run the program directly from your web browser. In either case, you should run DiscWizard before you install your drive. To run DiscWizard: Follow the instructions on the download page at to create a diskette and complete the installation. If you cannot run DiscWizard, follow the instructions on this installation sheet to install and configure your drive. What you need • A Phillips screwdriver and four 6-32 UNC drive mounting screws • An ATA interface cable. For optimum drive performance and data integrity, use an 80-conductor Ultra ATA/100 cable (which can be identified by its blue, gray, and black connectors). Ultra ATA/100 requirements The drive can be configured to support a default maximum transfer rate. This drive can support transfer rates up to 100 Mbytes per second (UDMA 5) in Ultra ATA/100 mode. Using a software utility, you can set the default transfer rate to the best capability of your system. For your drive to run in this mode, you need the following: • A computer that supports UDMA mode 5 • A 40-pin, 80-conductor cable (available from your computer dealer) • A software utility to confirm and activate Ultra ATA/100. Seagate provides a utility called UATA100.exe. You can download the latest version from our web site at • Windows XP, Windows Me, or Windows 98 operating system which supports Ultra ATA 100. Large disc requirements (for capacities over 137 Gbytes) To realize the full capacity of drives over 137 Gbytes: • Use an operating system that supports 48-bit addressing: - Microsoft Windows XP Home with Service Pack 1 (or later) -Microsoft Windows XP Professional with Service Pack 1 (or later) - Windows 2000 Professional with Service Pack 3 - Windows 2000 Server with Service Pack 3 • Use a 48-bit compatible Ultra ATA/133 PCI host adapter card or connector on your motherboard. Go to for additional information. Breather filter hole precaution Caution. Do not cover, seal, or insert any object into this hole. This hole has two purposes: • To allow condensation inside the hard disc to escape • To allow air pressure inside the hard disc to equalize with ambient pressure If this hole is covered, sealed, or penetrated by any object, the drive reliability may be compromised and could lead to permanent damage—doing so voids the warranty. Handling precautions/electrostatic discharge protection • Disc drives are fragile. Do not drop or jar the drive. Handle the drive only by the edges or frame. • Drive electronics are extremely sensitive to static electricity. While installing the drive, wear a wrist strap and cable connected to ground. • Turn off the power to the host system during installation. • Do not disassemble the drive; doing so voids the warranty. Return the entire drive for depot service if any part is defective. • Do not apply pressure or attach labels to the drive. Settin...

Descargar ahora

Introduzca dos números de la imagen: