Front grease trough, slide out stainless steel water pan/grease drawer and 4" (102mm) chrome plated adjustable legs are standard. The tilting breakfast griddle is 1/4" (7mm) cold rolled steel. Interior combustion chamber is fabricated of 11 gauge and 16 gauge HRS and hand welded to form a single unit. The XX-4BG features four 24" long, 18,000 BTU/HR, independently controlled, clog-proof, high efficiency burners. 14 Gauge, 300-series stainless steel radiant heat deflectors are placed directly a

The griddle plate is 1" thick (25.4mm) and 24" deep (610mm), polished, cold-rolled steel. Six widths are available from 24" (610mm) to 72" (1829mm) in one foot increments. The XG Series features high-performance, energy-efficient, 30,000 BTUH burners located every 12" with individual, operator-controlled valves and are available in three control types: manual, thermostatic or snap-action. Snap-action controls are supplied with NEMA 15-P cord & plug in 120V. The interior combustion chamber is hea

Safe Work Practices Beware of High Voltage This equipment uses high voltage. Serious injury can occur if you or any untrained or unauthorized person installs, services, or repairs this equipment. Always Use an Authorized Service agent to Service Your Equipment. 2 Universal Warmer Introduction Keep this manual with the Equipment This manual is an important part of your equipment. Always keep it near for easy access. If you need to replace this manual, contact: BKI Technical Services Department P.

Ensure that all packaging has been removed before switching on. Installation Due to the open fronted design, the maximum holding time for the product to be held will depend on the siting of the cabinet in store. Ideally the cabinet should not be sited by entranceways, ventilation fans or next to refrigeration units as this could adversely effect the performance. After positioning the Cabinet, connect the main power lead to a 230v 13A electrical supply ensuring that the lead is kept as short as p

Defective conditions caused by abnormal use or misuse, lack of or improper maintenance, damage by third parties, alterations by unauthorized personnel, acts of God, failure to follow installation and/or operating instructions, or any other events beyond the reasonable control of the Company will NOT be covered under this warranty. The obligation of the Company under this warranty shall be limited to repairing or replacing (at the option of the Company) any part, with the exception of lamps, fuse

Box 80400 Simpsonville, S.C. 29680-0400 Or call toll free: 1-800-927-6887 Outside the U.S., call 864-963-3471 Protect Children Keep children away from this equipment. Children may not understand that this equipment is dangerous for them and others. NEVER allow children to play near or operate your equipment. Keep Safety Labels Clean and in Good Condition Do not remove or cover any safety labels on your equipment. Keep all safety labels clean and in good condition. Replace any damaged or missing

This unit, when installed by an authorized BKI service agent, must be wired for use in accordance with all applicable local, state, and federal codes. For specific electrical requirements and connections refer to the wiring diagram attached to the unit or provided in the Service Manual. 6 Mobile Merchandiser Replacement Parts Replacement Parts Use the information in this section to identify replacement parts. To order replacement parts, call your local BKI sales and service representative. Befor