Iniciar sesión:
Votos - 0, Puntuación media: 0 ( )

Manual de usuario HP, modelo HP 10 Gigabit Ethernet Cards

Fabricar: HP
Tamaño del archivo: 170.97 kb
Nombre del archivo:
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Otros manuales para este modelo:

Resumen del manual


2 New and changed features in this release
2.1 New features
The following feature is new with this version of 10GigEthr-03:

Support is added for NC552m.
This version enables support for the HP NC552m Dual-Port Flex-10 10GbE BL-c Adapter (part
number 610609-B21) on HP Integrity BL8x0c i2 servers. For more information on supported
servers, see the HP-UX Ethernet Card Support Matrix on the HP website at:
http://www.hp.com/go/10-gigabit-ethernet-docs
IMPORTANT:
At the time of this publication, NC552m adapter firmware version 3.104.322.0
is required for use in HP Integrity servers. If you purchase an NC552m as a stand-alone
product, it might ship with a lower or higher adapter firmware version pre-installed. You must
install firmware version 3.104.322.0 before booting HP-UX.
NC552m adapters that are pre-installed in a server with order option 0D1 have the correct
firmware version pre-installed.
For the latest information about supported adapter firmware, see the HP-UX Ethernet Card
Support Matrix
on the HP website at:
http://www.hp.com/go/10-gigabit-ethernet-docs
Firmware requirements in the Support Matrix supersede the information in this document.
Downloading NC552m firmware
To download NC552m firmware for HP Integrity servers, follow these steps:
1.
Go to the HP Business Support Center website at:
http://www.hp.com/go/bizsupport
2.
Click Download drivers and software.
3.
In the “Search products” field, search for NC552m.
4.
On the “Product search result” page, click HP NC552m 10Gb 2-port Flex-10 Ethernet
Adapter.
5.
Under “Select operating system,” click Cross operating system (BIOS, Firmware,
Diagnostics, etc.).
6.
Locate the link labeled “Firmware and EFI driver for Integrity servers” or similar. To
download the firmware and EFI driver package, click the Download button. Installation
instructions are included in the download package.
2.2 Changed features
The following features are changed with this version of 10GigEthr-03:

The user interface is enhanced.
The user interface has been enhanced, as follows:

Help information is improved in the configuration files for various parameters.

Additional data are included in the nwmgr and lanadmin info and card_info
displays.

VPD data is included.
4


...

Otros modelos de este manual:
Equipo de red - HP Converged Network Adapters (CNA) (170.97 kb)
Equipo de red - HP-UX 11i v3 I/O Cards (170.97 kb)

Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría