Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
Installing OnlineDiag
Failure to properly complete the steps in this procedure may result in erratic system behavior
or system failure and may void the warranty. For assistance with this procedure, contact your
local HP Authorized Service Provider.
Install OnlineDiag, which is available at the Software Depot website:
http://h20392.www2.hp.com/portal/swdepot/index.do. OnlineDiag is also available from the IPF
CD for Itanium®-based systems.
Verify the adapter installation
1.
To verify that the system recognizes the NIC, view the output listing from the following
command:
# ioscan -fknC lan
2.
Verify the following drivers appear for each installed adapter. If all the drivers are listed,
proceed to “Verifying connectivity” (page 8).
If your adapter is installed in a system with a Flex-10 interconnect module, the ioscan
-fknC lan output will appear similar to the following (output may be slightly different
through different systems):
NOTE:
In the following example, the NC532m adapter is installed in Mezzanine Slot #1
of a BL870c or BL860c “B” model system. The NC532m IO paths have been highlighted in
bold.
Class I H/W Path Driver S/W State H/W Type Description
=====================================================================
lan 0 0/1/1/0 igelan CLAIMED INTERFACE HP PCI-X 1000Mbps Dual-port Built-in
lan 1 0/1/1/1 igelan CLAIMED INTERFACE HP PCI-X 1000Mbps Dual-port Built-in
lan 2 0/2/2/0 igelan CLAIMED INTERFACE HP PCI-X 1000Mbps Dual-port Built-in
lan 3 0/2/2/1 igelan CLAIMED INTERFACE HP PCI-X 1000Mbps Dual-port Built-in
lan 4 0/3/0/0/0/0 iexgbe CLAIMED INTERFACE HP 454521-001 PCIe 2-p 10GbE Mezzanine Adapter
lan 5 0/3/0/0/0/1 iexgbe CLAIMED INTERFACE HP 454521-001 PCIe 2-p 10GbE Mezzanine Adapter
lan 10 0/3/0/0/0/2 iexgbe CLAIMED INTERFACE HP 454521-001 PCIe 2-p 10GbE Mezzanine Adapter
lan 11 0/3/0/0/0/3 iexgbe CLAIMED INTERFACE HP 454521-001 PCIe 2-p 10GbE Mezzanine Adapter
lan 12 0/3/0/0/0/4 iexgbe CLAIMED INTERFACE HP 454521-001 PCIe 2-p 10GbE Mezzanine Adapter
lan 13 0/3/0/0/0/5 iexgbe CLAIMED INTERFACE HP 454521-001 PCIe 2-p 10GbE Mezzanine Adapter
lan 14 0/3/0/0/0/6 iexgbe CLAIMED INTERFACE HP 454521-001 PCIe 2-p 10GbE Mezzanine Adapter
lan 15 0/3/0/0/0/7 iexgbe CLAIMED INTERFACE HP 454521-001 PCIe 2-p 10GbE Mezzanine Adapter
When the ioscan output displays, the second pathing column represents the hardware
path of the slot that the adapter is installed. This path will be different for each installed
adapter port.
If your adapter is installed in a system with a non-Flex 10 interconnect module or switch,
an output similar to the following will be displayed:
NOTE:
In the following example, the NC532m adapter is installed in Mezzanine Slot #1
in the second blade of a BL870c i2 or a BL890c i2 model system. The NC532m IO paths have
been highlighted in bold.
Class I H/W Path Driver S/W State H/W Type Description
========================================================================
lan 0 1/0/0/3/0/0/0 iexgbe CLAIMED INTERFACE HP PCIe 2-p 10GbE Built-in
lan 1 1/0/0/3/0/0/1 iexgbe CLAIMED INTERFACE HP PCIe 2-p 10GbE Built-in
lan 2 1/0/0/4/0/0/0 iexgbe CLAIMED INTERFACE HP PCIe 2-p 10GbE Built-in
lan 3 1/0/0/4/0/0/1 iexgbe CLAIMED INTERFACE HP PCIe 2-p 10GbE Built-in
lan 34 1/0/0/5/0/0/0 iexgbe CLAIMED INTERFACE HP 454521-001 PCIe 2-p 10GbE Mezzanine
Adapter
lan 35 1/0/0/5/0/0/1 iexgbe CLAIMED INTERFACE HP 454521-001 PCIe 2-p 10GbE Mezzanine
Adapter
The fourth pathing column represents the hardware path of the slot in which the adapter is
installed. This path will be different for each installed adapter port.
3.
Observe whether the ioscan output reports the following:
lan 0/3/0/0/0/0 UNCLAIMED UNKNOWN
Installing OnlineDiag
7
...Otros modelos de este manual:
Equipo de red - HP-UX 11i v3 I/O Cards (339.24 kb)