Hold the steam head vents away from you and steam in a vertical up and down motion. This will allow the condensation in the hose to flow back into the steamer. Fig 13 Fig 14 16) Press the Power Button to turn the unit on. Hold the steam head up and facing away from you for the 40 seconds it takes to heat up. once you see that a steady steam vapor is emitted from the steam head, the Steam Station is ready to use. 17) Hold the wand of the steam head firmly and slowly move it across the surface to

Fig 3 • 50% untreated tap water with 50% distilled or demineralized bottled water 4) Once removed from the main body, turn the Water Reservoir up to show the grey stopper. (Fig 3) 5) Grasp the tab on the stopper and gently pull the stopper out (Fig 4). Remove it only enough to allow for adding water. DO NOT break the connecting elastic band. Fig 4 6) Add water to the reservoir thru the stopper hole until the reservoir is full. Do not overfill. Carefully replace the stopper and close it securely

Turn the grooved tubes on each side of the support to fasten, then hang the steam head between the prongs at the top. • Align the shoulders of the garment on the hanger and allow it to hang freely. • When pressing clothing, temperature, humidity and pressure are important. Because the steam released is of high temperature (212SF). temperature and humidity conditions for easy pressing are sufficient. Since clothing is hung from the support and hangs freety. the pressure on the garment may be w

This plug wi fit in a polarized outlet only one way. If the plug does not fit fufy In the outlet reverse the plug. If it still does not fit contact a qualified electrician to install the proper outleL Do not change the plug in any way. SAVE THESE INSTRUCTIONS FOR HOUSEHOLD USE ONLY Commercial use of this unit voids the manufacturer's warranty. 1 SETUP Powerful Steam Jets O Crease Making Tool ► Attach to the syeamer head to use with shirt cuffs and cottars and/or creating creases in pants