. . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Equipment Inspection and Storage . . . . . . . . . 1 Final Equipment Inspection . . . . . . . . . . . . . . . 1 Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Power Connections . . . . . . . . . . . . . . . . . . . . . . 2 Engine Start Control Connections . . . . . . . . . 3 Exerciser Option . . . . . . . . . . . . . . . . . . . . .

1. Check that the sensor cable is connected to J4 on the PCA printed circuit assembly. 2. Check the cable connection to the temperature sensor. 3. Replace sensor and/or cable -call AMEREC's Service Department. Control "ON". K60 Control displays "E002". Temperature sensor. or cable shorted. 1. Check sensor cable for damage from nail/staple puncture. 2. Check sensor cable ends for frayed/exposed wire strands. 3. Replace sensor and/or cable -call AMEREC's Service Department. Control "ON". K60 Contr

SECTION 4: MAINTENANCE OF YOUR AK STEAM GENERATOR The steam generator, steam head, fittings and plumbing connections should be inspected regularly for water leaks and damage. The AK steam generator is equipped with a manual drain valve for flushing sediments from the generator tank. This procedure should be scheduled monthly or more often depending on local water conditions and steam bath usage. Flushing Procedures: 4. The unit will drain without heating the water. 1. The generator should be coo

If the steam room temperature nately displayed every 5 seconds. The primary Fahrenheit with an initial default of 120 degrees. drops more than 5 degrees both elements will control can be mounted either inside or outside Once the set temperature is reached the ''soft automatically engage. SECTION 1B: STEAM GENERATOR OVERVIEW - CELSIUS AND 24 HOUR OPTIONS As an option your K60 control can be ordered with a Celsius and/or 24 hour timer in place of the Fahrenheit and 60 minute standard. The Celsius

There are no user serviceable parts in this equipment. All installation and service to this equipment should be performed by qualified licensed personnel. Do not exceed 30 minutes in a steambath. Excessive exposure can be harmful to your health. Excessive exposure can produce a rapid pulse, light-headedness, weakness or fainting. If you become uncomfortable or experience any of the above conditions exit the steambath immediately. Steambaths can put stress on the body. Therefore a steambath shoul

200 MHz (max.) Pixel clock accuracy...................... 100 ppm Horizontal frequency range (factory defaults) 15 kHz to 131 kHz Vertical frequency range (factory defaults) 30 Hz to 120 Hz Rise/fall time NTSC, PAL......................... 140 ns All other signal rates......... <4 ns Video output Number/signal type..................... 1 RGBHV, RGBS, RGsB, RsGsBs, component video, HDSDI (SMPTE 292M), SDI digital component video (SMPTE 259M-C), S-video, composite video (NTSC/PAL) Conne

¦ High resolution video output signals: Computer, plasma, HDTV ¦ NTSC or PAL video output signals: Component, S-video, composite ¦ 34 scan rates ¦ Broadcast quality video encoder ¦ 13 video test patterns ¦ Six audio test signals ¦ Protective rubber boot ¦ Battery operated or DC powered ¦ Integrated battery charger (VTG 300R only) VTG 300 VIDEO TEST GENERATOR AUDIO SIGNAL TEST PATTERNS RANGE OUTPUT RATE MENU RATE NEXT POWER SELECT LEVEL FREQUENCY VIDEO P.NOISE W. NOISE SINE SQUARE POLARITY SWEEP

2- 5 Connecting Audio Outputs ................................................ 2- 5 Output 1 ................................................................................. 2- 5 Output 2 ................................................................................. 2- 6 Output 3 ................................................................................. 2- 6 Menus, Configuration, and Adjustments................... 2- 6 Moving through menus by using front panel controls ......... 2- 6

THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING THE OPERATION AND WARRANTY OF THIS PRODUCT. PLEASE RETAIN FOR FUTURE REFERENCE. 4140 S.W. 30th Ave., Ft. Lauderdale, FL 33312 Toll Free: (800) 544-6986 VEC1029FPOB_ManualEN_101606 10/16/06 5:17 PM Page 1 IMPORTANT SAFETY INSTRUCTIONS WARNINGS TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, EXPLOSION OR INJURY: • This equipment employs components that tend to produce arcs or sparks. DONOT install in compartments containing batteries or flammable ma

Any maintenance instructions or recommendations in the engine owner’s manual take precedence over any of the following general recommendations. General: 1. Inspect the fuel system for leaks. Replace all defective components immediately. 2. Inspect and replace any fuel line that shows signs of deterioration. 3. Inspect all the fuel clamps to ensure they are tight. 4. Make sure the fuel cap fits snugly on the fuel tank and that the fuel tank contains no leaks. 5. Inspect and clean the battery post