Order late model Lid) Lid Assy, Reservoir (Includes items 7, 12 & 14) (Late models) 7 12332.0000 1 Gasket, Lid 8 12294.0000 1 Retainer Cap, Vent Ball 9 10 00598.0002 12288.0000 1 1 Ball, .50” Dia. Retainer Cap, Vent Ball Early models 11 00598.0001 1 Ball, .25” Dia. 12 - - - - - - - 29690.0004 1 1 Lid, Reservoir (Early models. Order Late Model Lid) Lid, Reservoir (Late models) 13 12327.0000 1 Ball, 20 mm Dia. (Early models) 14 - - - - - - - 12289.0001 1 1 Retainer Cap, Top Vent (Early models. Ord

(“BUNN”) warrants equipment manufactured by it as follows: 1) Airpots, thermal carafes, decanters, GPR servers, iced tea/coffee dispensers, MCP/MCA pod brewers thermal servers and Thermofresh servers (mechanical and digital)- 1 year parts and 1 year labor. 2) All other equipment -2 years parts and 1 year labor plus added warranties as specified below: a) Electronic circuit and/or control boards - parts and labor for 3 years. b) Compressors on refrigeration equipment - 5 years parts and 1 year la

Remove all packaging materials before using. 2. Before using, wipe blades and stainless steel bowl with a damp lint-free cloth, wash and dry lid (see CARE AND CLEANING). CAUTION: BLADES ARE SHARP. HANDLE CAREFULLY. CAUTION: NEVER PLACE BASE OF APPLIANCE IN WATER OR OTHER LIQUIDS. 3. Place up to 3.4 cup of coffee beans at a time into the stainless steel bowl. If a larger quantity is needed, grind in several small batches. 4. Place the lid on top of the base (see Figure 1). NOTE: The appliance wil

1. Unplug the grinder. 2. Remove Lid, wash in warm sudsy water, rinse and dry thoroughly. CAUTION: BLADES ARE SHARP. HANDLE CAREFULLY. CAUTION: NEVER PLACE BASE OF APPLIANCE IN WATER OR OTHER LIQUIDS. 3. Use a stiff brush to remove any remaining coffee grinds or other ground food from inside the stainless steel bowl. 4. Clean exterior of base with a soft damp cloth and dry. Place lid on base for storing. 5. Turn upside down and wrap cord around cord storage on inside of base (see Figure 3). 4 LI

Coffee Grinder Use and Care Guide Models 1119, 1119B and 1119CAN • STAINLESS STEEL BLADES • EASY ACCESS CORD STORAGE • GREAT FOR MAKING FLAVORED COFFEES • 2-OUNCE CAPACITY FOR 12 CUPS OF COFFEE IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: • Read all instructions before using appliance. • Do not immerse motor base, cord or plug in water or other l

THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of Bunn are not authorized to make modifications to this warranty or to make additional warranties that are binding on Bunn. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not be

6 RECTIFIER Location: The rectifier(s) is located inside on the right side of the stand housing just to the right of the transformer for 1SH Stand and on the right and left side of the stand housing for 2SH Stand. Test Procedures: 1. Disconnect the stand from the power source. 2. Remove the red wire and the black wire from the rectifier. 3. Check the voltage across the (+) and (-) terminals on the rectifier with a voltmeter. Connect the stand to the power source. The indication must be 24 volts

Pot level, cold brew lock-out and tank temperature set easily from advanced touch pad on front of machine. Electronic diagnostics and built-in tank drain make service easier. Coffee controlled extraction with programmable pre-infusion and pulse brew. For current specification sheets and other information, go to Related Products Easy Clear® EQ-17-TL Product No. : 30200.1000 Dimensions: 127/16" H x 2V2" W x 3" D 31 .6 cm H x 6.35 cm W x 7.62 cm D Easy Clear® ED-17-TL Product No. : 30201.

15. Slip the mixing chamber (1) onto the mixing chamber water inlet tube far enough so the mixing chamber (1) will seat inside the whipper chamber (3). 16. Install hopper assembly in the dispenser by sliding hopper firmly behind the retainer plates on the hopper support panel. 9 8 7 6 5 4 1 3 2 FIG. 7 MIXING/WHIPPER CHAMBER COMPONENTS P1895 1. Mixing Chamber 2. Dispense Tip 3. Whipper Chamber 4. O-Ring 5. Frother 6. Receptacle w/Seal 7. Nut 8. Slinger 9. Motor Assembly 29793 061599 SERVICE (cont

5. Reconnect the twelve pin connector to the control board (J1). 6. Disconnect the four pin connector (J7) from the control board. 7. Check the voltage across pins 1 & 3 of the four pin connector on the wiring harness with a voltmeter. Connect the dispenser to the power source and select the “ON” position of the main power switch. The indication must be: a) 120 volts ac for 120 volt models. b) 230 volts ac for 230 volt CE models. 8. Select the “OFF” position of the main power switch and disconne