Votos - 4, Puntuación media: 4.8 ( )

Fabricar: Fedders Tamaño del archivo: 947.49 kb Nombre del archivo: Idioma del manual:

OPERATION (Continued) OPERATION CONDITION TIMER MODE (ON, OFF) • The timer can be set during any mode. Select the timer setting by pressing: ON-TIMER button or OFF-TIMER button. (Example) Time is AM 10:20. Air-conditioner is not in operation. How to start the air conditioner at PM 1:30 and stop it at PM 6:30. mark will blink 1. Press the button. button. Time can also be adjusted by 10-minute intervals by pressing button at center interval. 2. Press button to adjust ON TIMER to PM 1:30 (Time can be adjusted at hour intervals by pressing and holding 3. Press the TIMER button. 4. Press the 5. Press Time can be adjusted at hour intervals by pressing and holding button. Time can also be adjusted by 10-minute intervals by pressing button at center interval. 6. Press the TIMER button. To CANCEL Press the “C” button. Check if current time is set correctly. If current time is not correct, timer will not operate at desired time. button to adjust OFF TIMER to PM 6:30 • Operation Temperature Range: HYUNDAI OPERATING RANGES Mode Temperature (°F) Indoor Humidity Indoor Outdoor Cool 70-90 70-109 <80% Dry 59-90 59-109 <80% Heat 59-81 32-75 <80% • If you operate the unit(s) at other than the above conditions, a safety device may be activated and shut off the power. • On humid days, frost may form on the surface of air conditioner or condensation may occur. HIGH POWER MODE Convenient on a hot day. (During AUTO, HEAT, COOL or DRY mode) Press the HIGH POWER To CANCEL: Press the HIGH POWER but- button. ton once more. The operation is set back to the previous operation mode. HIGH POWER MODE When the HIGH POWER mode button is pressed, heated or cooled air comes into the room at a higher fan speed for 15 minutes. The fan speed changes rhythmically between high and ultra-high. ! CAUTION ! When the air conditioner(s) continue to run on HIGH POWER mode in a large room, they may not reach the set room temperature due to limited cooling capacity. This may cause water drops to form around the outlet. In such cases, please switch to MANUAL mode. ECR International Hyundai Ductless Split System7 To CANCEL: Press the ON/OFF button. This will stop the ONE HOUR TIMER opera- Press the 1HR TIMER button. OPERATION (Continued) To CANCEL: Press the ON/OFF button. This will stop the ONE HOUR TIMER opera- Press the 1HR TIMER button. OPERATION (Continued) SLEEP MODE The desired room temperature is maintained quietly at lower fan speed. (During AUTO, HEAT, COOL or DRY mode) Press the SLEEP button. To CANCEL: Press the SLEEP button once more. The mode is set back to the previous operating mode. SLEEP MODE • Decreases the fan speed of Indoor Unit(s) automatically and quiet operation is carried out. • When Sleep mode starts to operate, desired temperature will change automatically (see below). Heat* 3°C(6°F) down an hour after 4°C(8°F) down another 3-hours after Cool & Dry 1°C(2°F) goes up an hour after • When sleep mode starts to operate, flaps will move up or down by one-step automatically. ...

Descargar ahora

Introduzca dos números de la imagen: