This manual contains all of the information required to guarantee your safety and the appropriate use of your air conditioner. Please read all of the instructions before using the air conditioner and keep this manual for future reference. We know you will enjoy your new air conditioner and thank you for choosing our product. We hope you will consider us for future purchase. Environmental advices The packaging material used is recyclable. We recommend that you separate plastic, paper and car

• Do not run air conditioner with outside protective cover in place. This could result in mechanical damage within the air conditioner. • Do not use an extension cord or an adapter plug. READ THIS SECTION BEFORE ATTEMPTING TO OPERATE AIR CONDITIONER. Operation of Current Device Plug in & press RESET NOTE: Some plugs have buttons on the top. The power supply cord contains a current device that senses damage to the power cord. To test your power supply cord do the following: 1. Plug in the Air Con

¦ Su modelo podria variar del modelo mostrado. A A. Rejillas del gabinete Instalacion en la ventana Medidas de la abertura de la ventana: ¦ Ancho: 25" (63,5 cm) minimo a 38" (96,5 cm) maximo ¦ Altura: 14" (35,6 cm) minimo A B A. 25" (63,5 cm) minimo a 38" (96,5 cm) maximo B. 14" (35,6 cm) minimo ADVERTENCIA Peligro de Choque Electrico Conecte a un contacto de pared de conexion a tierra de 3 terminales. No quite el terminal de conexion a tierra. No use un adaptador. No use un cable electrico de e

To change the set temperature, press “COOL” then Up or Down arrows until the desired temperature is indicated on the display. After 5 seconds, the control will automatically change the display back to the hours remaining until the unit will start/stop. Turning the unit “ON” or “OFF” at any timer will cancel the Delay Start/Stop function. The delay Start/Stop feature will work until the unit either starts or stops. Once this has happened then the above steps have to be repeated again. 7 Air Condi

Set the thermostat at the highest number for the coldest setting. Once the room has reached the desired temperature, adjust the thermostat to a number providing the most comfort. Higher numbers provide lower room temperatures. Lower numbers provide warmer room temperatures. Night Time Cooling When outside temperatures drop below 70°F (21°C) and the unit is cooling, frost may form on the coils and block airflow into the room. If this occurs, operate the air conditioner on the “HIGH FAN” setting t