This measurement should be taken at several points around the bowl to assure accuracy. To Adjust Bowl / Agitator Clearance • Remove the Apron (which is secured by 4 thumbscrews). • Loosen the Locking Nut on the Stop Screw (Fig. 7), turn the Stop Screw counterclockwise to increase the clearance or clockwise to decrease the clearance. • Tighten the Locking Nut while holding the Stop Screw. • After adjustments are made, replace the Apron. • Reconnect the electrical power supply. • Carefully

It has a single speed transmission and features a 2V2 horsepower Hobart-built motor, a #12 attachment hub, and an electro-mechanical timer as standard equipment. A 60 quart stainless steel mixer bowl and a 60 quart burnished aluminum ED style dough arm are furnished with each mixer. Bowl Guard is standard equipment on all P660 models. These mixers can be ordered with deluxe finish, which includes a chrome plated transmission case, base, bowl support, and pedestal. Model P660 Mixer Shipping

Hobart Designed Fixed Speed Motor ¦ Gear-Driven Transmission ¦ Three Fixed Speeds ¦ Hybrid Powder Coat finish available in Hobart Gray ¦ Large, Easy-To-Reach Controls ¦ #10 Taper Attachment Hub ¦ Manual Bowl Lift ¦ 5-Quart Stainless Steel Bowl, “B” Flat Beater, “D” Wire Whip, “ED” Dough Hook, Cord and Plug ACCESSORIES . Stainless Steel Bowl . “B” Flat Beater . Stainless Steel “B” Flat Beater . “D” Wire Whip . “ED” Dough Hook MODEL . N50 – 5-Quart All Purpose Mixer with Bowl, Beater, Whip and Hoo

Prior to installation, test the electrical service to assure that it agrees with the specifications on the machine data plate. LOCATION Place the mixer on a suitable sturdy level surface. There should be adequate space around the mixer for the user to operate the controls and install and remove bowls. ELECTRICAL CONNECTIONS (Cord Connected Mixers) WARNING: THE ELECTRICAL CORD ON THIS MACHINE IS EQUIPPED WITH A THREE-PRONGED GROUNDING PLUG WHICH MUST BE CONNECTED TO A PROPERLY GROUNDED RECEPTACLE

701 S. RIDGE AVENUE PLE200388 - A3 - 9 - 97 TROY, OHIO 45374-0001 F-23138 (6-98) N50 INSTALLATION OPERATION MAINTENANCE PLE200388 - A3 - 9 - 97 F-23138 (6-98) – 4 – Contents Safety Information................................................................................................................................................... 6 Warning Symbols ..............................................................................................................................................

RIDGE AVENUE • TROY, OHIO 45374-0001 • 937-332-3000 • WWW.HOBARTCORP.COM IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. To protect against the risk of electrical shock, do not put mixer in water or other liquid. 3. Close supervision is necessary when this or any appliance is used by or near children. 4. Unplug mixer from outlet when not in use, before putting on or taking off

3. Slide the agitator up the agitator shaft until it stops and latches (Fig. 6). To Remove 1. Open the wire cage. 2. Lower the bowl by pressing and holding the down arrow on the bowl switch. 3. Hold the agitator and pull the plunger of the agitator out (Fig. 7). Slide agitator down off the agitator shaft. Fig. 6 Fig. 7 – 10 – POWER BOWL LIFT POWER BOWL LIFT Fig. 8 To raise the bowl, the bowl must be in the locked position. Push and hold the up arrow on the bowl switch. To lower the bowl, push an

RIDGE AVENUE TROY, OHIO 45374-0001 937-332-3000 · WWW.HOBARTCORP.COM FORM 34985 (May 2007) S – 2 – TABLE OF CONTENTS GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

B (May 2007) Installation, Operation and Care of Model HCM450 Cutter Mixer SAVE THESE INSTRUCTIONS GENERAL The HCM450 Cutter Mixer cuts, mixes or blends foods quickly and efficiently. A transparent lid allows the operator to inspect the product during the mix-cut-blend process. The unit operates continuously, momentarily or with a timer control which shutsoff the machine automatically after the set time has elapsed. The HCM450 bowl has a liquid capacity of 45 quarts. The motor on HCM450 is rated

2000) MODEL A200 MIXER – 2 – Installation, Operation, and Care of A200 MIXER SAVE THESE INSTRUCTIONS GENERAL The model A200 mixer is a 20 quart, bench-type mixer with a 1/2 H.P. motor, and a #12 attachment hub. With the use of special agitators, a 12 quart bowl may be used on the A200 mixers. The floor model and the deluxe finish model are equipped with a timer. Most A200 mixers are equipped with a 0 - 15 minute timer. There are a variety of attachments and accessories available for all models,