Manual de usuario Yamaha, modelo CL5
Fabricar: Yamaha
Tamaño del archivo: 3.2 mb
Nombre del archivo:
Idioma del manual:
|
 
|
|
|
Enlace gratuito para este manual disponible en la parte inferior de la página
Otros manuales para este modelo:
Resumen del manual
If you want to use GEQ modules to the input channels, you can mount them in the EFFECT rack ( . p.58.) 3 Module graphic This area shows a graphic of the GEQ module that is currently assigned to the rack, and the parameters of that module. You cannot edit the parameters in this screen. Double-click this to open the module editor for that rack unit. By holding down the (< >) key of your computer keyboard and double-clicking this, you can open multiple rack module editors. For these additional editors, the rack select buttons are not linked with the RACK popup window of the CL itself. 4 Input meter/Output meter These indicate the level of the signals being input and output from the rack. 5 Output patch Select the output port(s) that will be assigned to the rack, from the following choices. NONE No assignment INS MIX 1–24 MIX channel 1–24 insert in INS MTRX1–8 MATRIX channel 1–8 insert in INS ST L, INS ST R, INS M(C) Insert-in of STEREO channel L/R or the MONO channel 6 ON This switches the GEQ module between active and bypassed states. A GEQ module is active when the ON button is lit. 7 GEQ Link Indicator If a GEQ LINK is active, the GEQ Link indicator will be displayed in the left side of the rack (. p.57.) CL Editor Owner’s Manual 54 Rack module editor — GEQ window . 31BandGEQ . Flex15GEQ In this window you can select the insertion destination of GEQ, and edit the parameters. 1 Rack No. (Rack selection) 1 Select the rack module of the GEQ rack that you want to control. 2 LIBRARY This button accesses the GEQ library. Clicking this button will open the GEQ page of the Library window. 2 CL Editor Owner’s Manual 55 3 334 Click the CHANNEL field, and choose one of the following as the signal route that will be patched to the input channel(s) of the currently selected GEQ module. 56 NONE No assignment INS MIX 1–24 MIX channel 1–24 insert out INS MTRX1–8 MATRIX channel 1–8 insert out INS ST L, INS ST R, INS M(C) Insert-out of STEREO channel L/R or the MONO channel The channel name is shown in the boxes immediately below. 4 Input meter This indicates the level of the signal that is being input to the currently selected GEQ module. 5 Output patch Click the CHANNEL field, and choose one of the following as the signal route that will be patched to the output channel(s) of the currently selected GEQ module. NONE No assignment INS MIX 1–24 MIX channel 1–24 insert in INS MTRX1–8 MATRIX channel 1–8 insert in INS ST L, INS ST R, INS M(C) Insert-in of STEREO channel L/R or the MONO channel The channel name is shown in the boxes immediately below. 6 Output meter This indicates the level of the signal that is being output from the currently selected GEQ module. CL Editor Owner’s Manual 56 . . 70A89 . Flex15GEQ A87B0 7 ON (GEQ on/off) Switches the currently selected GEQ module on/off. 8 LINK This button links the settings of two adjacent odd-numbered/even-numbered 31BandGEQ modules, or the group A and group B settings of a Flex15GEQ. When you click this button, a window will ask you for confirmation. Click the buttons for the modules you want to use as the parameter copy-source and copy-destination. If you click the RESET BOTH button, the parameters of both modules will be reset to the default state. 9 GEQ graph This graph shows the response of the currently selected GEQ module. 0 GEQ faders These faders cut/boost the frequency bands of the GEQ module. The value of each fader is shown in the numerical box below it. Hold down the (< >) key and click to set the value to 0.00 dB. A EQ FLAT This button resets all GEQ faders to the 0 dB position. B AVAILABLE BANDS (number of operable bands) (Flex15GEQ only) For a Flex15GEQ, you can operate any fifteen of the thirty-one bands. This numerical display box shows the remaining number of bands that can be operated. If you have operated fifteen bands, this number will be zero, and you won’t be able to operate any additional bands. If you want to operate another band in this state, you’ll need to return a previously- operated band back to the 0 dB position. CL Editor Owner’s Manual 57 EFFECT page 12 3645 1 Mount Select an effect module or GEQ module for mounting in the rack, from the following choices. BLANK No assignment 31BandGEQ 31-band 1-in/1-out graphic equalizer Flex15GEQ 2-in/2-out graphic equalizer that allows any fifteen of the 31 bands to be controlled EFFECT Internal effect 2 Input patch Click the L CHANNEL or R CHANNEL area, and choose one of the following as the signal route that will be patched to the L/R input channels of the internal effect. This is not shown if nothing is mounted in the rack. NONE No assignment MIX 1–24 MIX channel 1–24 MATRIX1–8 MATRIX channel 1–8 ST L, ST R, MONO(C) STEREO channel L/R, MONO channel INS CH 1–72(*) INPUT CH 1–72(*) insert out INS MIX 1–24 MIX channel 1–24 insert out INS MTRX1–8 MATRIX channel 1–8 insert out INS ST L, INS ST R, INS M(C) Insert-out of STEREO channel L/R or the MONO channel (*) CL3: 1-64, CL1: 1-48 CL Editor Owner’...
Otros modelos de este manual:
Instrumentos Musicales - CL1 (3.2 mb)
Instrumentos Musicales - CL3 (3.2 mb)
)
