Votos - 2, Puntuación media: 3.5 ( )

Fabricar: Toshiba Tamaño del archivo: 3.3 mb Nombre del archivo: Idioma del manual:

The default setting for the modem is COM3. The following procedure is intended to support you if you need to either upgrade your modem or reset the port to the default settings. If you are having trouble connecting through the modem, you may need to determine the current COM port name and possibly change it. To find out which port your modem is connected to: 1 Click Start, Control Panel. 2 Click Printers and Other Hardware. 3 Click Phone and Modem Options. The Phone and Modem Options Properties dialog box displays. 4 Fill in the Local Information text boxes and click OK. 5 Click the Modems tab. Your modem should be listed next to one of the computer’s COM ports. 6 Make a note of the COM port number. 7 To verify that the modem is set up properly, select the modem you wish to check, and then click Properties to bring up the dialog box with information specific to that modem. Windows XP communicates with the modem and displays identifying information reported by the modem. If Windows XP cannot communicate with the modem, it displays an error message. Consult the troubleshooting sections of your modem and Windows XP documentation. Exploring Your Computer’s Features 133 Setting up for communications 8 Click OK to close the properties dialog box for that specific modem. 9 Click OK to close the Modem Properties dialog box. 10 Close the Control Panel. Connecting the modem to a telephone line Your computer comes with a built-in modem that can be connected to a standard voice-grade telephone line. The modem allows you to: . Access the Internet. . Communicate with your office’s local area network (LAN) or larger corporate wide area network (WAN). For specific information about connecting to a LAN or WAN, consult your network administrator. . Send a fax directly from your computer. For more detailed information regarding your computer’s modem, visit Toshiba’s Web site at accessories.toshiba.com. Before you can communicate using the modem, you need to connect it to a telephone line. Your computer’s built-in modem port provides an RJ-11 jack, allowing you to connect the modem to a standard voice-grade telephone line. 1 Plug one end of a telephone cable (purchased separately) into the modem port on the right side of the computer. Sample connecting the telephone cable to the modem port Exploring Your Computer’s Features 134 Setting up for communications 2 Connect the other end to the RJ-11 wall jack. Sample connecting to a wall jack The modem is designed for use with a standard analog telephone line. Do not connect the modem to a digital telephone line. A digital line will damage the modem. Now you are ready to send a fax or use the modem to connect to an online service or the Internet. Connecting your computer to a network You can connect your computer to a network to increase its capabilities and functionality using one of its ...

Descargar ahora

Introduzca dos números de la imagen: