Votos - 3, Puntuación media: 4 ( )

Fabricar: Toshiba Tamaño del archivo: 3.3 mb Nombre del archivo: Idioma del manual:

The previous track button/next track button returns to the preceding track on the disc (press the left side of the button) or skips to the following track on the disc (press the right side of the button). Learning the Basics 101 Using the CD-RW/DVD-ROM or multi-function drive The play/pause button starts playing the disc or makes it pause if currently playing. The stop button stops a disc that is currently playing. Inserting a compact disc To insert a compact disc into the drive: 1 Make sure the computer is turned on. 2 Make sure the drive’s in-use indicator light is off. 3 Press the drive’s eject button. The disc tray slides partially out of the drive (about 1 inch). HINT: The drive will not open if the computer’s power is off. 4 Grasp the tray and pull it fully open. Sample drive tray fully extended 5 Hold the disc by its edges and check that it is free of dust. If the disc is dusty, clean it as described in “Caring for CD or DVD Discs” on page 106. Learning the Basics 102 Using the CD-RW/DVD-ROM or multi-function drive 6 Place the disc carefully in the disc tray, label side up. Sample positioning the disc in the drive 7 Gently press the disc onto the center spindle until it clicks into place. Handle DVDs and CDs carefully, making contact only with the center hole and edge. Do not touch the surface of the disc. Do not stack discs. If you incorrectly handle the discs, you could lose data. 8 Make sure the disc is completely on the spindle and is lying flat on the tray. If you insert the disc incorrectly, it may jam the drive. If this happens, contact Toshiba support for assistance. 9 Push the disc tray in by pressing gently on the center of the tray until it clicks into place. You are ready to use the disc. Learning the Basics 103 Using the CD-RW/DVD-ROM or multi-function drive Playing an audio CD Insert an audio CD and close the disc tray. If the computer is turned on, Windows Media® Player opens and the CD begins to play. You can use the Windows Media Player program to control the CD. To access the Windows Media Player, you can open it through the Start menu or activate it from the taskbar. NOTE When using Windows Media Player, your system may not be able to activate Standby or Hibernation modes. To prevent this from occurring, close Windows Media Player before you select Standby or Hibernation mode. Stop button Play/pause button Sample Windows Media Player screen Learning the Basics 104 Using the CD-RW/DVD-ROM or multi-function drive The Windows Media Player control panel works much like an ordinary compact disc player: . To play the CD or to pause, click the Play/pause button. . To stop the CD, click the Stop button. Before putting on headphones to listen to an audio CD, turn the volume dial down. Do not set the volume too high when using the headphones. Continuous exposure to loud sound can harm your hearing. Playing CDs manually If you insert a CD into the CD-RW/DVD-ROM or multifunction drive and ...

Descargar ahora

Introduzca dos números de la imagen: