4. Allow one hour for the refrigerant to settle before plugging ice maker in. 5. The appliance must be positioned so that the plug is accessible. DANGER CONNECTING YOUR ICE MAKER ! * Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is damaged please call customer service. 1. This unit should be properly grounded for your safety. The power cord of this appliance is equipped with a three-prong plug which mates with standard three prong wall outlets to

.. Do not clean your ice maker with flammable fluids. The fumes can create a fire hazard or explosion. .. Do not tip over. .. Do not operate with side or back panels removed. .. If the ice maker is brought in from outside in wintertime, give it a few hours to warm up to room temperature before plugging it in. Text Box: IMPORTANT SAFETY TIPS GETTING TO KNOW YOUR UNIT OPERATING PROCEDURES & MAINTENANCE 1. Remove the exterior and interior packaging. Check that ice basket and ice scoop are included.

READ ALL INSTRUCTIONS BEFORE USING THE ICE MAKER. • DANGER: RISK OF CHILD ENTRAPMENT. CHILD ENTRAPMENT AND SUFFOCATION ARE NOT PROBLEMS OF THE PAST. JUNKED OR ABANDONED APPLIANCES ARE STILL DANGEROUS. BEFORE YOU THROW AWAY YOUR ICE MAKER: TAKE OFF THE DOOR. NEVER ALLOW CHILDREN TO OPERATE, PLAY WITH, OR CRAWL INSIDE THE APPLIANCE. NEVER CLEAN ICE MAKER PARTS WITH FLAMMABLE FLUIDS. THE FUMES CAN CREATE A FIRE HAZARD OR EXPLOSION. DO NOT STORE OR USE GASOLINE OR ANY OTHER FLAMMABLE VAPORS AND LIQU

and maintenance. Please read it carefully and save it for reference. TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS........................... 1 PREPARING YOUR ICE MAKER FOR USE IMPORTANT SAFETY TIPS . . 2 GETTING TO KNOW YOUR UNIT................................... ...............................3 OPERATING PROCEDURES A MAINTENANCE UNPACKING YOUR ICE MAKER.................................... ...............................5 CONNECTING YOUR ICE MAKER.................................. ..

... ..3 33OPERATING PROCEDURES & MAINTENANCE UNPACKING YOUR ICE MAKER ..………….…………………………………………...4 CONNECTING YOURICE MAKER……………….……….……………………………..4 CLEANING AND MAINTAINING YOUR ICE MAKER….……………………………….4 USING YOUR ICE MAKER……………….……..………………………………………...5 TROUBLESHOOTING..……………………….……………………………………………6 TECHNICAL SPECIFICATIONS & CIRCUIT DIAGRAM…..……………..….………..8 WARRANTY…………………………..……….………………………………………….…9 Y YYo oour urur sa sasaf ffe eet tty yy a aan nnd dd t tthe saf he safhe safet etety yyo oof f

User’s Manual Clear Ice Maker Be sure to stand the ice maker upright for at least 24 hours prior to plugging it in. Installation only by a licensed plumber. Thank you for purchasing this EdgeStar product. We are glad you chose us. We believe that your purchase of this product opens a relationship between you and EdgeStar. We will provide the customer support needed to nurture that relationship. This manual contains important information regarding the proper installation, use and maintenance of y

This ice maker is designed for domestic indoor use only. Do not use the unit for industrial or commercial use. Any other use may invalidate the warranty. Please review the ratings label located on the rear panel of the unit for electrical and other technical data related to this unit. The unit must be used in a properly grounded wall outlet. Please read and follow the safety information listed below to reduce the risk of fire, electric shock or injury. Installation should only be done by a licen

Recommended grounding method For your personal safety, this appliance must be grounded. It is equipped with a power supply cord having a 3-prong grounding plug. To minimize possible shock hazard, the cord must be plugged into a mating 3-pronged and grounding-type wall receptacle, grounded in accordance with the National Electrical Code and local codes and ordinances. If a mating wall receptacle is not available, it is the personal responsibility of the customer to have a properly grounded, 3-pro

Cleaning the system regularly helps remove the mineral scale buildup. How often you need to clean the system depends upon how hard your water is or how effective your filtration may be. With hard water of 15 to 20 grains/gal. (4 to 5 grains/liter), you may need to clean the system as often as every 6 months. 1. Turn off the power to the ice maker. Keep the ice maker connected to the water supply and drain pipe. 2. Open the door and scoop out all of the ice cubes. Either discard them or save them

Stop the ice maker, and restart it when the ice blocks melt. Select the small ice button. The water temperature in the inner tank is too low. Change the water in the inner tank. The ideal water temperature is 45°-90°F. tThe ice making cycle seems normal but no ice is produced. The ambient temperature or the water temperature is oo high. Please run the ice maker in temperatures below 90°F and/or pour colder water into tank. Refrigerant liquid leakage. Consult a qualified technician. A pipe in the