10 En Punto Proceda a cortar 8 En Punto 5 En Punto Rotacion del Disco/Cuchilla Figura 26 Cortes Verticales Sostenga la desmalezadora con el disco a un angulo de 90 grados con respecto al suelo, de forma que el borde inferior del disco gire hacia el operario. Mueva el disco de arriba para abajo a travez del corte, y corte solamente con el borde inferior del disco. Velocidades de Operacion del Motor Opere el motor a maxima potencia mientras corte. Para mayor eficiencia de combustible, suelte el ac

ion Slip Clutch Standard Slip Clutch Standard Slip Clutch Standard Blade Holder(s) Round Round Round Blades 1/2 x 4 inch uplift 1/2 x 4 inch uplift 1/2 x 4 inch uplift Blade Tip Speed 15,551 FPM 14,877 FPM 14,514 FPM Tires Laminated Laminated Laminated, dual or single Minimum Tractor HP 30 PTO 40 PTO 50 PTO Front and Rear Deflectors Standard Equipment - Front Belting and Rear Bands, optional chain shielding, all 3 models Approximate Weight 785 lbs 942 lbs 1127 lbs Warranty 1 ye

THEREFORE, THIS CUTTER IS NOT TO BE OPERATED ALONG HIGHWAYS OR IN ANY AREA WHERE PEOPLE MAY BE PRESENT UNLESS ALL SIDES OF THE UNIT ARE ENCLOSED BY PERMANENT BANDS, SAFETY CHAINS, OR OTHER FACTORY APPROVED SAFETY SHIELDS THAT ARE IN GOOD REPAIR. CEASE MOWING WHENEVER ANYONE COMES WITHIN THE OPERATING AREA. 3-4 TRANSPORTING When implement is transported on road or highway, day or night, use tractor flashing warning lights unless prohibited by law. A slow moving vehicle (SMV) sign must be visible

8.8 shearbolt Slip Clutch/Optional 10 x 55 mm Metric Gr. 8.8 shearbolt Slip Clutch/Optional Slip Clutch Standard Blade Holder(s) Straight Oval type Oval type Oval type Oval type Blades 3/8 x 3 inch uplift 3/8 x 3 inch uplift 1/2 x 4 inch uplift 1/2 x 4 inch uplift 1/2 x 4 inch uplift Blade Tip Speed 11,400 FPM 13,029 FPM 14,335 FPM 14,963 FPM 14,963 FPM Tires Laminated or Solid Rubber Laminated or Solid Rubber Laminated or Solid Rubber Laminated or Solid Rubber Laminated Tractor HP Range 1

5 (540 RPM - Pull and Semi-Mount) Cross Shaft ASAE Cat. 4 Rubber Element ASAE Cat. 5 Rubber Element Gearbox HP (3) 205 Center, 190 Outboards (2) 205 Main, 190 Outboard Tractor PTO Speed 540 RPM 540 RPM Driveline Protection 4 Plate PTO Slip Clutch 4 Plate PTO Slip Clutch Height Adjustment Manual or Hydraulic Manual or Hydraulic Blade Holder(s) Round Round Blades 1/2 x 4 inches - Uplift 1/2 x 4 inches - Uplift Blade Tip Speed 15,176 FPM 15,176 FPM Tires Laminated, Pneumatic, Aircraft Lami

II & III Standard & Quick Hitch, Cat. II & III (Semi-Mount) and Center Pull Self Leveling Cutting Height 2 to 13 inches Deck Thickness 10 gauge Side Bands 1/4 x 10 inches Minimum Tractor HP 90 PTO (Lift), 75 PTO (Pull) Driveline ASAE Cat. 5 (For 540 RPM Lift, Pull and Semi-Mount), ASAE Cat. 4 (For 1000 RPM Pull Models) Cross Shafts ASAE Cat. 5 Rubber Element or Optional Cat. 4 Shear Pin/Rubber Element Gearbox HP (3) 205 - Center, 190 - Outboard Tractor PTO Speed 540/1000 RPM Driveline P

8.8 2 13 9100204 SPRING WASHER 8MM 2 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL OCTOBER, 2012 MAINARM REF. PART NO. NO. DESCRIPTION QTY. 1 41199.06 MAINARM W/ASSY RH 1 2 21149.01 PIVOT, BUSHING 2 3 0901121 GREASE NIPPLE, 1/8" BSP-STRAIGHT 3 4 41200.02 TENSION LINK 1 5 7105050 BUSHING, ROD END 1-1/4” OD X 1“ ID 2 6 41268.02 MAIN PIVOT PIN 1 7 9313045 CAPSCREW M10-P1.5 - 20MM 1 8 00765676 LOCKNUT, M10-P1.5 TOP LOCK 1 9 41691.04 PIN W / ASSY. - LIFT / REACH-MAG420 1 10 9313065 CAPSCREW 10-P1.5

NOTE: For proper operation, always refer to the instructions accompanying the trimmer head being used. Trimmer head styles: Semi-automatic. Trimmer line is indexed when the operator taps the trimmer head on the ground during operation. Manual. The operator indexes line manually with the grass trimmer stopped. Fixed. The operator must stop the unit and add new lengths of trim- mer line manually. Flail. This device, designed for clearing weeds and light brush, fea- tures three nylon blades attache

Bush Hog1' TOUGH LIMITED AVAILABILITY 278 Series Rotary Cutters BUSH HOG® TOUGH FEATURES TOUGH 9 Gauge Deck TOUGH 9 Gauge Sidebands TOUGH Rigid Strongback TOUGH Standard Dual Wheel TOUGH Round Bladeholders TOUGH Powder Coat Paint Cutting Width Cutting Capacity Up to 2 inch Diameter Offset 78№ inches Dimensions (width x length) 8 ft 5 inches x 7 ft 3 inches Transport Width 101 inches Type Hitch 3 Point Category II, Category II Quick Hitch or Pull Cutting Height 21/2 to 10 inches (Lift),