234657811. Temperature control dial2. Temperature ready light3. Spray button4. Burst of Steam Button5. Variable Steam Control6. Water Inlet7. Spray Nozzle8. Water level indicatorThe odor is safe and should not reoccur after initial heating. Also, before ironing with steam for the first time, allow iron to heat, hold in a horizontal position and hit the burst of steam button several times. The iron may emit some small particles from the steam holes. This is normal and will clear after pressing th

Burns can occur touching hot hot water TO EMPTY THE IRON • Unplug iron from the electrical outlet. • Follow instructions to empty the iron. • Then, follow the instructions for filling the iron. Following this procedure will ensure that you do not overfill the iron. TO ADD WATER SELF-CLEANING In order to remove calcium and built-up particles, the self-cleaning system should be run at least once a month. • Fill the watering beaker provided to the half-full mark and then pour into the water reservo

Read all instructions before using your Garment Steamer. 2. Use the system only for its intended use. 3. To protect against a risk of electric shock, do not immerse any part of the system in water or other liquids. 4. Never yank cord to disconnect from outlet; instead, grasp plug and pull to disconnect. 5. Do not allow cord to touch hot surfaces. Let the system cool completely before putting away or opening water tank (removing the safety cap) . Wrap cord loosely around system when storing. 6. A

• Overuse of steam burst. Allow more time betweeneach burst. • Iron may have been overfilled. Turn iron off,emptywater and follow instructions for filling. • Steam performance may be low if iron requires seasoning. To season, use regular tap water for 1or 2 tanks until steam improves. 9 IRONING CHART NOTE: Before starting to iron delicate fabrics, it is best to first test the temperature of the iron on a hem or an inside seam. To select iron temperature, align temperature selected on dial with t