Iniciar sesión:
Clasificado: Nombre ↓   Descargas   Tarifa   Tamaño ↑  
Descargado: 9   Tamaño del archivo: 22 kb   Fabricar: Attwood  
Categoría: equipamiento barco
@name@name@name

2. Asegurese de que los reflectores laterales apunten hacia afuera desde los costados del remolque. Utilice la luz lateral izquierdas/del lado de la carretera para insertar las cabezas de los pernos de montaje en las ranuras de la parte trasera del bastidor. Pase el cable y los pernos de montaje a traves de los orifi cios del soporte para la placa de matricula e instale en el remolque utilizando tuercas de cierre. Instale la luz con el cable verde del lado del pasajero, el lado derecho del remol

Descargado: 8   Tamaño del archivo: 448 kb   Fabricar: Attwood  
Categoría: equipamiento barco
@name

• Removes rust drip stains and rust sprinkler deposits. PREMIUM MARINE POLISH • The ultimate protection for fiberglass, metal & painted surfaces • Last up to 6 times longer than other marine polishes • UV inhibitors help stop fading and oxidation • Leaves a super smooth, non-stick coating which reduces drag and repels dirt, grime, oil and stains • Race tested; increases hull speed • For medium to heavy oxidation use Premium Cleaner Wax BOAT WASH & WAX • Environmentally friendly, biodegradable fo

Descargado: 6   Tamaño del archivo: 479 kb   Fabricar: Attwood  
Categoría: equipamiento barco
@name

If installing a combination light, place it on the furthermost tip of the bow on the centerline of the boat. (See Figure 1a.) If installing sidelights, the red lens must be on the port (left) and the green on the starboard (right) as you stand onboard facing the bow of the boat. (See Figure 1b.) Figure 1a Figure 1b 112.5° Arc Must Be Clear Green (Starboard) Red (Port) Red (Port) Green (Starboard) 2. Ensure that there are no front or side obstructions, such as rail stanchions, chocks, anchors, et

Descargado: 9   Tamaño del archivo: 479 kb   Fabricar: Attwood  
Categoría: equipamiento barco
@name

Ensure that there are no front or side obstructions, such as rail stanchions, chocks, anchors, etc., within the arc of visibility (112.5° each side). certain that centerline of hole is aligned with boat centerline. Drill a 1-..." (29mm)-dia. hole. (See Figure 2.) Figure 2 (Applies to Quasar Light, not Snap Base) 13/16" (21mm) • 15/16" (24mm) • • FORWARD (14mm) (25mm) 2-1/4" (57mm) 1-1/8" (29mm) •• 9/16" • • 1" • • • MOUNTING INSTRUCTIONS 1. To access mounting holes inside the base: Loosen retain

Descargado: 4   Tamaño del archivo: 479 kb   Fabricar: Attwood  
Categoría: equipamiento barco
@name

Be 3® Quasar 12-Volt 2-Mile Navigational Light Without Wire Leads: 3100-3104, 3130-3134 With 7" Wire Leads: 3120-3124, 3150-3154 Attwood marine hardware, navigational lighting, bilge pumps, and other marine accessories are specified more than any other brand by America’s best-known boat manufacturers as original equipment. Look to Attwood for quality replacement parts and marine accessories. SAVE THESE INSTRUCTIONS Form Number 69385 Rev. B 03-10 Meets USCG CFR 183.810, ABYC A-16 requirements, an

Descargado: 8   Tamaño del archivo: 479 kb   Fabricar: Attwood  
Categoría: equipamiento barco
@name

Be 3® Quasar 12-Volt 2-Mile Navigational Light Without Wire Leads: 3100-3104, 3130-3134 With 7" Wire Leads: 3120-3124, 3150-3154 Attwood marine hardware, navigational lighting, bilge pumps, and other marine accessories are specified more than any other brand by America’s best-known boat manufacturers as original equipment. Look to Attwood for quality replacement parts and marine accessories. SAVE THESE INSTRUCTIONS Form Number 69385 Rev. B 03-10 Meets USCG CFR 183.810, ABYC A-16 requirements, an

Descargado: 4   Tamaño del archivo: 479 kb   Fabricar: Attwood  
Categoría: equipamiento barco
@name

They meet the ABYC Standard A-16, COLREG 72, and other selected international standards. REQUIRED FOR INSTALLATION The stylish housing is supplied in UV-stable, color-matched polycarbonate or chromed HIPP (High Impact Electroplated Plastic). The lens completely encapsulates the bulb and socket assembly for splash resistance. When used with the optional base gasket, these lights are virtually waterproof. • Screwdriver. • Drill with suitable bits — 1-..." (29mm). • Base gasket (Attwood # 910467) o

Descargado: 4   Tamaño del archivo: 479 kb   Fabricar: Attwood  
Categoría: equipamiento barco
@name

If installing a combination light, place it on the furthermost tip of the bow on the centerline of the boat. (See Figure 1a.) If installing sidelights, the red lens must be on the port (left) and the green on the starboard (right) as you stand onboard facing the bow of the boat. (See Figure 1b.) Figure 1a Figure 1b 112.5° Arc Must Be Clear Green (Starboard) Red (Port) Red (Port) Green (Starboard) 2. Ensure that there are no front or side obstructions, such as rail stanchions, chocks, anchors, et

Descargado: 7   Tamaño del archivo: 479 kb   Fabricar: Attwood  
Categoría: equipamiento barco
@name

Any expenses involved in the removal, reinstallation or transportation of the product are not covered by this warranty. The product must be returned to Attwood’s plant at the address above, postage pre-paid, and insured with proof of original purchase including date. If Attwood is unable to replace the product and repair is not commercially practical or cannot be timely made, or if the original consumer purchaser is willing to accept a refund in lieu of repair or replacement, Attwood may refund

Descargado: 12   Tamaño del archivo: 479 kb   Fabricar: Attwood  
Categoría: equipamiento barco
@name

THIS WARRANTY IS ATTWOOD’S ONLY EXPRESSED WARRANTY OF THESE PRODUCTS. NO IMPLIED WARRANTY INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE EXTENDED BEYOND THE WARRANTY PERIOD STATED ABOVE FOR EACH PRODUCT. ATTWOOD SHALL NOT BE LIABLE FOR ANY DAMAGES, FOR LOSS OF USE OF THIS PRODUCT, NOR FOR ANY OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES, COSTS, OR EXPENSES. Some states do not allow limitations on how long an implied warranty l





Categoría