Insert less food. Insert food of room temperature only. Check if door is fully closed. Cooling is too strong. Thermostat is set too high. Set to lower position. No cooling at all. Plug is not properly inserted into socket. No current in socket. According to the indicator, the on/off switch (B) is not switched on. Check plug-socket connection. Check presence of current. Press the on/off switch (B) for more than a second. Noisy operation Product support is not correct. Check stability of product s
If the cabinet will be kept on, ask somebody to check it once in a while to prevent the food inside from spoiling in case of a power failure. WHAT TO DO IF… WARNING! Before troubleshooting, disconnect the mains plug from the mains socket. Only a qualified electrician or competent person must do the troubleshooting that is not in this manual. There are some sounds during normal use (compressor, refrigerant circulation). Problem Possible cause Solution The appliance does not The appliance is switc
The buzzer sounds. The The temperature in the freezer is Refer to "High Temperature Alarm icon flashing. too high. Alarm". The door is not closed correctly. Refer to "Door open alarm". An error has occurred in meas- Call your service representative upper or lower square uring the temperature. (the cooling system will continue is shown in the tempera- to keep food products cold, but temperature adjustment will not be possible). ture display dEMo appears on the dis-The appliance is in demonstra-Ke
• Make sure that the mains plug is accessible after the installation of the appliance. • Connect to potable water supply only. 4) Service • Any electrical work required to do the servicing of the appliance should be carried out by a qualified electrician or competent person. • This product must be serviced by an authorized Service Centre, and only genuine spare parts must be used. Environment Protection This appliance does not contain gasses which could damage the ozone layer, in either its refr
1. Power cord must not be lengthened. 2. Make sure that the power plug is not squashed or damaged by the back of the appliance. A squashed or damaged power plug may overheat and cause a fire. 3. Make sure that you can come to the mains plug of the appliance. 4. Do not pull the mains cable. 5. If the power plug socket is loose, do not insert the power plug. There is a risk of electric shock or fire. 6. You must not operate the appliance without the lamp cover (if foreseen) of interior lighting. •
50mm Electrical Connection CAUTION! Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. WARNING! This appliance must be earthed. The manufacturer declines any liability should these safety measures not be observed. Installation 17 The wires in the mains lead are coloured in accordance with the following code: 135 Green and Yellow: Earth Brown: Live Blue: Neutral As the colours of the wires in the mains lead of this applianc
2. Press the OK button to confirm. 3. The Child Lock indicator goes off. High temperature alarm Temperature increase in the freezer compartment (for example due to an earlier power failure or door is open) is indicated by: • flashing the alarm and freezer temperature indicators • sounding of buzzer. To reset the alarm: 1. Press any button. 2. The buzzer switches off. 3. The freezer temperature indicator shows the highest temperature reached for a few seconds. Then show again the set temperature.
On all shelves except for the top shelf it is possible to place food that protrude 15 mm from the door. In the event of accidental defrosting, for example due to a power failure, if the power has been off for longer that the value shown in the technical characteristics chart under "rising time", the defrosted food must be consumed quickly or cooked immediately and then refrozen (after cooling). Thawing Deep-frozen or frozen food, prior to being used, can be thawed in the refrigerator compartment
If the ALARM STOP button is not pressed then the acoustic alarm will break off after approx. one hour. The Red ALARM Indicator Light will continue to flash. Press the ALARM STOP button. Switching off • Press the ON/OFF Button for appr. 3 seconds. • The Green ON/OFF Indicator Light and the Display switches off. • To disconnect the appliance from the power disconnect the mains plug from the wall socket. 8 8 Control panel Temperature regulation The set temperature of the freezer may be adjusted by
• The Green ON/OFF Indicator Light will light up continuously. • The lighting up of the Green ON/OFF Indicator Light means that the appliance is switched on. • The blinking of the Red ALARM Indicator Light and the Acoustic Alarm means an improper temperature in the freezer. • To switch off the Acoustic Alarm and the Temperature Display flashing, press ALARM STOP Acoustic Alarm OFF Button. • When switching on the freezer for the first time, the Red ALARM Indicator Light will blink until the inter