In this package you will find: • One main unit (receiver) • One remote rain gauge (transmitter) • One remote temperature sensor (transmitter) TS13C Please keep this manual handy as you practical step-by-step instructions, well as technical specifications and precautions you should know. 3 PRODUCT OVERVIEW MAIN UNIT FEATURES • Wireless transmission of the rainfall data from the remote rain gauge to the main unit up to 100 feet (30 meters) away • Wireless transmission of the temperature from the r

The comfort level is displayed on the weather stationportion of the main unit’s display. It is based on thecombination of the current indoor temperature andhumidity readings. There are following comfort levelsmay be displayed: COMFORT (comfortable); WET (wet) and DRY (dry) Indicator displayed Temperature Range Humidity Range Shows current condition COMFORT WET DRY 40%RH70% RH OVER 70%RH Below 40%RH Ideal for both relative humidity and temperature Contains excess moisture Contains inadequate mois

MAIN UNIT • Remove the battery compartment door. • Install 2 batteries ( UM-3 or “ AA” size 1.5V) matching the polarity as shown in the battery compartment. • Replace the battery compartment door. LOW BATTERY WARNING A low- battery indicator [ ] will appear next to the indoor or remote data reading line of the main unit warning that the corresponding batteries need replacement. 9 GETTING STARTED WEATHER DISPLAY After batteries are installed; remote sensor will transmit temperature data at 45 sec

This is normal and does not affect the general performanceof the product. The transmission and reception of thetemperature readings will resume once the interference ends. CHECKING REMOTE AND INDOOR TEMPERATURE The indoor temperature is shown on the third line of themain unit display. The remote temperature is shown belowthe top line of the display. The wave icon near the remotetemperature reading indicates that there is a good signalreception from the remote sensor. 15 If there is no signals re

• Multi-channel capability to monitor temperature and humidity in up to 3 remote locations In this package you will find: • Indoor/Outdoor temperature with trends • Main unit (receiver) • Indoor/Outdoor humidity with comfort level indicators • Remote sensor (transmitter) TS33 • Weather forecast in 5 large graphic icons: Please keep this manual handy as you use your Sunny, Partly Cloudy, Cloudy, Rainy and Snowy • Barometric pressure indication new item. It contains practical step-by-step instruct

The Time Zone is set CLOCK • Press and hold MODE button for 3 seconds: the year will flash. Press UP ( ^ ) or DOWN ( Ў ) to change flashing digits. • After the year is set, press MODE button to confirm and move to the 22 21 next parameter ( month) • Continue setting month, date, hour, minutes, language for the day of the week and temperature in Fahrenheit or Celsius • Press MODE for the last time to return to the time of day with seconds, after the last parameter is set CLOCK ALARMS The Barometr

In this case, the local altitude/elevation must be programmed according to the GPS readings, Internet, etc. If you wish to know pressure changes in your surrounding metro area, then SEA LEVEL barometric pressure option should be selected. In this case, the SEA LEVEL barometric pressure value can be adjusted according to the local metro area weather information. (Sources – local TV or radio station, etc.) OPERATION Press UP or DOWN until the weather forecast icon on the upper left of the display

This device combines precise time keeping with monitoring and displaying the wind speed information and temperature/ humidity data from up to five remote locations. In this package you will find: • One main unit (receiver) TE852W • One three-channel remote temperature and humidity sensor (transmitter) TS33C • One Wind Speed Meter (transmitter) TS815 • Mounting Hardware with wrench tool for Wind Speed Meter • One User Manual Please keep this manual handy as you use your new item. It contains prac

In this package you will find: One Main Unit (receiver) (TE923WD) One IR Remote Control (TS607) One Rain Gauge (remote rain sensor/transmitter) (TS906) One Anemometer (remote wind sensor/transmitter) (TS805) One UV (ultraviolet) sensor (remote ultraviolet sensor/transmitter) (TS704) One Five-Channel Temperature & Humidity Sensor (transmitter) (TS34C) One CD disk with generic PC connection software One USB cable One 7.5V AC/DC Adapter Mounting Hardware with Allen Wrench One User Manual Required f

• Place the remote UV sensor so that it faces the main unit (receiver), minimizing obstructions such as doors, walls and furniture. Installation The Honeywell Remote UV sensor TS704 operates at 433MHz radio frequency, so no wire installation is required between the main unit (receiver) and the remote UV sensor (transmitter). All data measured by the remote UV sensor is transmitted to the main unit wirelessly, with the operating range of 328 feet (100 meters) in the open area. Remote UV sensor mu