If there is any doubt regarding the suitability of a specific material contact your local Distributor or ITW Finishing direct. Model Part Number Example: COM-P430-14 Aircap Fluid nozzle size (14 = 1,4 mm) EC Declaration of ConformityWe: ITW Finishing UK, Ringwood Rd, Bournemouth, Dorset, BH11 9LH, UK, as the manufacturer of the Spraygun model Compact, declare, under our sole responsibility, that the equipment to which this document relates is in conformity with the following standards or other n

Nozzles and Needles are available in Stainless Steel. Important: These guns are not designed for use with highly corrosive and/ or abrasive materials and if used with such materials it must be expected that the need for cleaning and/or replacement of parts will be increased. If there is any doubt regarding the suitability of a specific material contact your local Distributor or ITW Finishing direct. Declaration of ConformityWe, ITW Finishing UK, Ringwood Road Bournemouth Dorset England declare u

DESCRIPTION The JGA-510 can be utilized with the wide range of air caps and needles. It is a general purpose, heavy duty, high production spray gun suitable for use with most types of materials. The fluid tip and needle and internal fluid passages are stainless steel. Conversion to HVLP -The JGA-510, plus JGA-503 models, can be converted to HVLP if desired. Contact DeVilbiss for information. Note This gun includes 300 series stainless steel fluid passages and 300/400 series tip and needle. Guns

Lleve siempre proteccion ocular al pulverizar o al limpiar la pistola. Deben llevarse guantes al pulverizar o al limpiar la pistola. Formacion -El personal debe recibir una formacion adecuada en el uso seguro de equipos de pulverizacion. MAL USO No apunte nunca con una pistola de pulverizacion a ninguna parte del cuerpo. No supere nunca la presion maxima de operacion segura recomendada del equipo. El acoplamiento de piezas de repuesto no recomendadas o no originales puede crear riesgos. Antes de

If there is any doubt regarding the suitability of a specific material contact your local Distributor or ITW Finishing direct. Model Part Number Example: COM-S430-16 Aircap Fluid nozzle size (16 = 1,6 mm) EC Declaration of Conformity We: ITW Finishing UK, Ringwood Rd, Bournemouth, Dorset, BH11 9LH, UK, as the manufacturer of the Spraygun model Compact, declare, under our sole responsibility, that the equipment to which this document relates is in conformity with the following standards or other