(2) Pull the cover lower side and detach the air cleaner cover. (3) Turn the choke lever to the full close side, and keep the carburetor off from dust or dirt. (4) If oil adheres to the element (sponge), squeeze it firmly. (5) For heavy contamination: 1) Remove the element (sponge), immerse it in warm water or in water-diluted neutral detergent, and dry it completely. 2) Clean the element (felt) with gasoline, and dry it completely. (6) Before attaching the element, be sure to dry it completely.

Carry out the correction at the two adjusting screws (L and H) as follows: Turn clockwise (leaner) for high altitude operation or counterclockwise (richer) for operation at sea level. IDLE ADJUSTMENT - The idle speed adjustment screw controls the throttle opening at idle position. - If engine stops while idling, turn the idle adjusting screw (1) clockwise until the engine runs smoothly. MAINTENANCE COUTION: Before doing any work on the blower always stop the engine and pull the plug caps of

Don't use tool in presence of flammable liquids or gases. 3. KEEP CHILDREN AWAY. All visitors should be kept away from work area. Don't let visitors contact tool or extension cord. 4. STORE IDLE TOOLS. When not in use, tools should be stored in dry, and high or locked-up place -out of reach of children. 5. DON'T FORCE TOOL. Itwill do the job better and safer at the rate for which it was intended. 6. USE RIGHT TOOL. Don't force small tool or attachment to do the job of a heavy-duty tool. Don't us

2) For dust blowing, attach the nozzle to blower outlet, turning clockwise to lock it in place. Dust suction (Fig. 3 & 4) For dust suction, fit nozzle onto suction inlet and dust bag onto blower outlet. After the bag fills with dust, empty the contents of the dust bag into a dust bin by releasing the fastener. CAUTION: Empty the dust bag before it becomes too full, or the suction force weakens. 3 Switch action MAINTENANCE CAUTION: Before inserting the battery cartridge into the tool,