Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
NetServer LXr Pro8 Outside Service Reference Label
002-52459, Label Version 2
About This Label
Specifications
Control Panel
Product and Part Numbers
Power Requirements
Audience Assumptions
Voltage and frequency: 200-240VAC 16A single cord input at 47-63Hz
Troubleshooting
For a list of all accessories, use the Information Assistant on a current
This Service Reference Label is for trained service personnel.
Power consumption: 970W typical usage max; 1560W design max
Check that the Satellite Retention Bracket is in place on
Navigator CD or download the HP NetServer Order Assistant from
Hewlett-Packard Company assumes you are qualified in the
Maximum inrush current: 80A for 10ms
the center rear of the base chassis.
www.hp.com/go/netserver. For rack configuration and installation
servicing of computer equipment and trained in recognizing
Power availability: 200W continuous to PCI cards and internal drives
Run Indicator
information, download the HP NetServer Rack Assistant.
hazards in products with hazardous energy levels.
Circuits: Delayed action circuit breaker recommended. Configurations
Green during power up = Power On Self-Test
002-52459, Rev B
use one or two branch circuits per rack.
has passed; system is starting to boot
Internal Accessories
• North America
Electrostatic Discharge To avoid catastrophic or hidden
D5030A
Processor Board, Dual 200 / 1MB (incl. CPUs)
208/240V 60Hz -- NEMA AB1 class 14B 20A for each 16A PDU.
Green during operation = BIOS is running
damage to components, wear a wrist strap and use a
D5026A
256MB Memory DIMM Kit (2 ea. 128MB DIMMs)
20 Amp branch circuits are recommended, using NEMA L6-20R
static-dissipative work surface connected to the chassis
DC Ouput Indicator
D5027A
Second Memory Board (32 DIMM sockets)
receptacles.
when handling components. Use an antistatic service kit,
Green = DC voltages from power supplies OK
D5963A
Non-DAC Ultra SCSI Extender Drawer, 6-Channel
• Outside North America
such as 3M 8501/8502/8505 or equivalent.
®
D5972A
DAC Cable Extender, 6-Cable
220 / 230 / 240V 50/60Hz -- IEC Type D for 16A circuits for each
Off = System in standby -- press power button.
Check CPU Power Switch on rear of
D5973A
Hot-Swap Kit -- Power Supply and Fan Packs
16A PDU. Minimum 16 Amp branch circuits are recommended.
This information is subject to change without notice and is provided
Docking Station
Space Requirements
Internal Mass Storage
without warranty.
System dims: 17.5"H x 19.0"W x 32.1"D (44.5cm x 48.6cm x 81.5cm)
AC Input Indicator
Copyright 1998, Hewlett-Packard Company. All rights reserved.
D4910A
4GB wide SCSI HDD with drive mounting tray
Rack space: 10 EIA units
Green = AC power input to system OK
D4911A
9GB wide SCSI HDD with drive mounting tray
Rack clearance: 46" (117cm) beyond rear of HP rack -- door mounted
Off = Check AC power to system
C1555A
DAT Tape, HP Model 24i (order D2199A tray)
30" (76cm) beyond rear of HP rack -- no door
System weight: 170lb (76kg)
Mounting Trays
Support
Air Conditioning Requirements
Attention Indicator
D2199A
5 1/2" DAT / CD Tray (3-pack; no front panel)
Maximum heat output: 3300 BTU / hour
Off = Normal operation
D2198B
3 1/2" Non Hot-Swap Drive Tray (3-pack; incl. front panel)
Operating temperature: 41 to 95 degrees F (5 to 35 degrees C)
HP NetServer Navigator CD:
Yellow = Component failure -- refer to message
Operating humidity: 20% to 80% RH noncondensing
display on Control Panel
CD is shipped with the system in the Navigator Kit.
I/O Cards
Flashing Yellow = Hardware Identification and
The Information Assistant on the CD contains complete
D4943A
NP NetRaid PCI DAC Card
Labeling Utility is flashing the light to
documentation and will search, display, and print on a NetServer
D4983B
Cable Kit for 3rd connector of D4943A DAC
identify this server
®
system or any Windows PC.
D5013A
HP DeskDirect 10/100TX PCI Server LAN Adapter
A copy of this label can be printed from the Information Assistant
Notes: Message display on control panel will display fatal errors
J2585B
HP DeskDirect 10/100VG PCI LAN Adapter
Tested PCI Cards
on a current Navigator CD. (To maintain safety compliance, do
for one minute before system shuts down.
not keep any paper inside the system cabinet.)
Limitations apply to the use of PCI cards in this system. Refer
4-pin connector on rear of Control Panel Board is unused.
External Mass Storage
to the Configuration Advisor on HP NetServer Navigator CD.
Subscriptions are available. See the Information Assistant or one
D3636C
SCSI Cable; Std. HD-68 to Std. HD-68, 2.5m
of the Electronic Support Services, below, for ordering.
D3637C
SCSI Cable; Std. HD-68 to Ultra HD-68, 2.5m
HP NetServer Diagnostic Assistant:
D4902A
Rack Storage/8 Storage Enclosure
Run from Navigator CD, or
D3583C
4.2GB Hot-Swap Ultra SCSI Disk Module
Use flexible disk shipped with system in pouch in the satellite, or
Data Integrity and System
Power Supply Modules
D4903A
4.2GB 10,000rpm Hot-Swap Ultra SCSI Disk Module
Download from one of the Electronic Support Services, below.
D4289A
9.1GB Hot-Swap Ultra SCSI Disk Module
Reliability
Troubleshooting
Proactive E-Mail Notification:
D5039A
18.2GB Hot-Swap Ultra SCSI Disk Module
Check the Satellite Power Interlock Switch on the left rear
Sign up at http://www.hp.com/go/netserver. Click on "Service
The covers and panels are integral parts of the system and must
of the base chassis.
be in place to maintain data integrity under normal levels of
and Support"
Uninterruptable Power Supplies (order from APC Corp.)
electromagnetic noise, static discharge, and vibration.
DC Output Indicator
Electronic Support Services:
NS3000RMT3U
208V UPS U.S. In: L6-20P, Out: 2 L6-20R and 1 L6-30R
Green = DC output voltages from module OK
Even at low room temperatures, all covers and panels must
Internet Web Page http://www.hp.com/go/netserver
NS3000RMI3U
230V UPS Europe In: C20, Out: 1 C19, 8 C13
be in place to provide controlled airflow for system reliability.
Off = Check CPU Power Switch on rear of
Internet FTP ftp://ftp.hp.com/pub/servers
Docking Station
CompuServe Library GO HPPC
Power Distribution Units (no power cord)
Check that each Mass Storage Shelf has either a drive or a
Support Questions:
filler panel -- whether or not the front door is in place.
AC Input Indicator
E7670A
10A PDU, 19"; In: C14, Out: 10 C13
HP-Authorized Reseller
Green = AC power input to module OK
E7671A
16A PDU, 19"; In: C20, Out: 6 C13 and 2 C19
Check that the rear panel, two fan packs, and the top cover are
CompuServe Discussion Forum GO HPPC
E7672A
Kit: E7670A and E7671A PDUs plus E7742A Jumper Cord
in place -- whether the system is rack-mounted or being shipped.
US / Canada Phone Support 1-970-635-1000 (Colorado)
E7666A
16A Dual-Input PDU, 56"; In: 2 C20, Out: 2 C19 and 12 C13
Europe Phone Support (+31-20) 581-3330 (Netherlands)
Shipping the System
Attention Indicator
Power Cords
All covers and panels must be in place when the system is moved
HP has offices in over 100 countries. Check telephone directory.
or shipped.
Off = Normal operation
E7798A
Power Cord, 250 VAC (C20 to C19), 2.5m (std. with system)
Yellow = System is in standby mode or one or more
E7804A
Power Cord, 250 VAC (C20 to C19), 4.0m
The shipping package protects the system -- including properly
installed mass storage devices -- under normal shipping conditions.
DC output voltages is out of specification
E7801A
Power Cord, 240 VAC (L6-20P to C19), 2.5m
E7803A
Power Cord, 250 VAC (L6-20P to C19), 4.5m
Satellite Disassembly /
Do not ship the system mounted in a rack.
Notes: Connector on front of each Power Supply Module is unused.
E7799A
Power Cord, 240 VAC (L6-30P to C19), 2.5m
E7805A
Power Cord, 240 VAC (L6-30P to C19), 4.5m
Reassembly
E7800A
Power Cord, 240 VAC (Unterminated to C19), 2.5m
E7806A
Power Cord, 240 VAC (Unterminated to C19), 4.5m
D4991A
Y Adapter Power Cord (C14 to 2 C13) (for 2 RS/8s in one rack)
6
Memory
Reserved
E7742A
Jumper Power Cord, 2.5m (C14 to C13)
Troubleshooting
Rack Accessories
Check that DIMMs are the correct HP product number. (See panel
8
of this label.) DIMMs supplied and warranted by HP have an
(Download HP NetServer Rack Assistant Software for details.
HP label. Repairs due to the use of non-HP DIMMs are not covered
See Panel on this label.)
31
0
under the warranty.
D4984A
Rack Installation Kit with Extra Hardware and Install Docs
x 4
5
E7797A
Rack Mounting Hardware Kit (25 ea. 10-32 screws and nuts)
Size
DIMMs Inter-
Memory DIMM Locations
leave
Board
E7723A
Cable Guide, 24", pkg. of 2
28
24
20
16
12
8
4
0
D4984-60007
Cable Ties, Hook-and-Loop, 12", pkg. of 5
256MB
2
4
Upper
D4950B
HP NetServer Keyboard, Mini-DIN
512MB
4
8
Upper
C3751B
HP Mouse, Mini-DIN
1GB
8
16
Upper
J1493A
Console Switch 4 port
J1497A
Console Switch 8 port
1.5GB
12
8
Upper
J1462A
Switch / Server Cables, 7 ft, set of 3 for one server
2GB
16
16
Upper
J1463A
Switch / Server Cables, 12 ft, set of 3 for one server
3GB
24
16
Upper
4
4GB
32
16
Upper
Size
DIMMs Inter-
Memory
leave
Board
28
24
20
16
12
8
4
0
Upper
4
3
5GB
40
16
Lower *
Upper
6GB
48
16
Lower *
Upper
7GB
56
16
Lower *
Upper
8GB
64
16
Lower *
* Refers to Optional Lower Memory Board