___________________ ____ Questions? As a manufacturer, we are committed to providing you complete customer satisfaction. If you have questions, or find there are missing or damaged parts, we will guarantee you complete satisfaction. To avoid unnecessary delays, contact your dealer immediately CAUTION: Read all safety precautions and instructions in the manual carefully OWNER’S MANUAL WARRANTY Voltair, Inc. warrants the Voltair against defective workmanship and parts in accordance with the warran

Save this manual. Copyright© 1999 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included. For technical questions or replacemen

The symbols set to the left of this paragraph are "Safety Alert Symbols" These symbols are used to call attention to items or procedures that could be dangerous to you or other persons using this equipment. ALWAYS PROVIDE A COPY OF THIS MANUAL TO ANYONE USING THIS EQUIPMENT. READ ALL INSTRUCTIONS IN THIS MANUAL AND ANY INSTRUCTIONS SUPPLIED BY MANUFACTURERS OF SUPPORTING EQUIPMENT BEFORE OPERATING THIS AIR COMPRESSOR AND ESPECIALLY POINT OUT THE "SAFETY WARNINGS" TO PREVENT THE POSSIBILITY OF PE

Do not use a damaged extension cord. 5. Keep cords away from heat and sharp edges. Do not pull on a cord to disconnect a plug -- grasp the plug. 6. Always shut off the compressor Pressure Switch before unplugging the compressor. PRE-START CHECKLIST: 1. Check oil level. Add if necessary. 2. Remove any moisture in the air compressor air tank. NEVER attemptto open the Air Tank Drain Valve when more than 10 PSI of air pressure is in the air tank! Remove excessive pressure with an air tool, then open

Se reserva el dercho de efectuar combios sin previo aviso. Manual del Operador Materias Manual del Operador Seguridad RECONOZCA INFORMACIoN DE SEGURIDAD Este es el simbolo de alerta de seguridad. Cuando mire este simbolo en la maquina o manual, sea alerta de posibilidad o potencia de graves personales. Siga precauciones recomendables y practicas de operacion. COMPRENDA PALABRAS DE ALERTAS Unapalabradealerta --Peligro,Advertencia,Precaucion --se usa con el simbolo de alerta de seguridad. Peligro

Air pressure should escape. When the ring is released, it will reset. MOTOR/PRESSURE SWITCH: This switch is used to start or stop the air compressor. Moving the switch to the "Auto" (On) position will provide automatic power to the pressure switch which will allow the motor to start when the air tank pressure is below the factory set "cut-in" pressure. When in the Start/Stop Option, the pressure switch stops the motor when the air tank pressure reaches the factor set "cut-out" pressure. For safe