Iniciar sesión:
Clasificado: Nombre ↑   Descargas   Tarifa   Tamaño ↑  
Descargado: 2   Tamaño del archivo: 1 mb   Fabricar: Impex  
Categoría: Formadores
@name

11. Never operate the machine if the machine is not functioning properly. 12. A spotter is recommended during exercise. CARE AND MAINTENANCE 1. Lubricate moving parts with WD-40 or light oil periodically. 2. Inspect and tighten all parts before using the machine. 3. The machine can be cleaned using a damp cloth and mild non-abrasive detergent. DO NOT use solvents. 4. Maximum weight capacity 300 lbs. WARNING: BEFORE BEGINNING ANY EXERCISE PROGRAM, CONSULT YOUR PHYSICIAN. THIS IS ESPECIALLY IMPORT

Descargado: 20   Tamaño del archivo: 1 mb   Fabricar: Impex  
Categoría: Formadores
@name

This equipment is intended to use indoor. 3. Position the equipment on a clear, leveled surface. Make sure the surfaces are free of objects that may cause tipping over. 4. Always wear appropriate workout clothing when exercising. 5. Disabled person should not use the equipment without a qualified person or physician in attendance. 6. Never use the equipment if it is not functioning properly. 7. Before exercising, always do stretching exercises to properly warm up. 8. Maximum user weight is

Descargado: 15   Tamaño del archivo: 1 mb   Fabricar: Impex  
Categoría: Formadores
@name

SAVE THESE INSTRUCTIONS. 2 WARNING LABEL REPLACEMENT The Warning Label shown here has been placed on the Rear Stabilizer. If the label is missing or illegible, please call customer service at 1-800-999-8899 for replacement. Apply the lable in location shown. 3 HARDWARE PACK 4 ASSEMBLY INSTRUCTION Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen Wrenches. NOTE: It is strongly recommended two or more people assembling this machine to avoid possible injury. STEP 1 (See Diagr

Descargado: 0   Tamaño del archivo: 2 mb   Fabricar: Impex  
Categoría: Formadores
@name

.” Washers (#31), and M10 Aircraft Nuts (#35). D.) Attach the Spring (#15) to the Stopper (#16). Push the Stopper into the hole on the post on the Main Frame. Align the slot on the Stopper with the open slot on the post. Insert the Lever (#5) through the open slot on the post into the slot on the Stopper. E.) Attach the Cross Brace (#1) to the Main Frame (#3). Secure it with two M10 x 2 .” Carriage Bolts (#46), . .” Washers (#31), and M10 Aircraft Nuts (#35). Tighten all nuts and bolts previousl

Descargado: 2   Tamaño del archivo: 2 mb   Fabricar: Impex  
Categoría: Formadores
@name

DIAGRAM 1 6 STEP 2 (See Diagram 2) A.) Attach the front of Main Seat Support (#3) to the Front Post (#9). Secure it with two M10 x 3 1/8” Carriage Bolts (#41), one 6 .” Bent Bracket (#18), two O .” Washers (#49), and two M10 Aircraft Nuts (#52). B.) Attach the Main Seat Support to the top of Front Post. Secure it with two M10 x 3 1/8” Carriage Bolts (#41), one 4 .” Bent Bracket (#17), two O .” Washers (#49), and two M10 Aircraft Nuts (#52). C.) Attach the Main Seat Support to the Cross Brace (#4

Descargado: 1   Tamaño del archivo: 2 mb   Fabricar: Impex  
Categoría: Formadores
@name

DO NOT use attachments not recommended by the manufacturer. 8. Do not place any sharp object around the machine. 9. Disabled person should not use the machine without a qualified person or physician in attendance. 10. Before using the machine to exercise, always do stretching exercises to properly warm up. 11. Never operate the machine if the machine is not functioning properly. 12. A spotter is recommended during exercise. CARE AND MAINTENANCE 1. Inspect and tighten all parts before using the m

Descargado: 2   Tamaño del archivo: 4 mb   Fabricar: Impex  
Categoría: Formadores
@name

Secure it with two M10 x 2 .” Carriage Bolts (#21), one Bracket (#15), two . .” Washers (#27), and two M10 Aircraft Nuts (#28). DIAGRAM 1 5 STEP 2 (See Diagram 2) A.) Slide the Sliding Block (#5) onto the Incline Adjustment Bar (#4). B.) Attach both ends of Incline Adjustment Bar to the open brackets on the Main Frame (#1). Secure each end with one M10 x 2 .” Carriage Bolt (#22), O .” Washer (#27), and M10 Aircraft Nut (#28). C.) Use a Lock Knob (#16) to lock the desired incline position. DIAGRA

Descargado: 0   Tamaño del archivo: 710 kb   Fabricar: Impex  
Categoría: Formadores
@name

. 6 WARRANTY.................................................................................................… 7 ORDERING PARTS......................................................................................... 7 BEFORE YOU BEGIN Thank you for selecting the IRON GRIP STRENGTH Deluxe Flat Bench IGS-663 by IMPEX INC. For your safety and benefit, read this manual carefully before using the machine. As a manufacturer, we are committed to provide you complete customer satisfaction. If you have

Descargado: 0   Tamaño del archivo: 2 mb   Fabricar: Impex  
Categoría: Formadores
@name

IMPEX INC. ASSUMES NO RESPONSIBILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE SUSTAINED BY OR THROUGH THE USE OF THIS PRODUCT. SAVE THESE INSTRUCTIONS. 2 WARNING LABEL PLACEMENT The Warning Label shown here has been placed on the Cross Brace. If the label is missing or illegible, please call customer service at 1-800-999-8899 for replacement. Apply the label in location shown. 3 HARDWARE PACK 4 HARDWARE PACK 5 ASSEMBLY INSTRUCTION Tools Required Assembling the Machine: Two Adjustable Wrenches and

Descargado: 0   Tamaño del archivo: 668 kb   Fabricar: Impex  
Categoría: Formadores
@name

1 IMPORTANT SAFETY NOTICES..................................................................... 2 ASSEMBLY INSTRUCTIONS........................................................................... 5 EXPLODED DIAGRAM…………………………………………………………….. 6 PARTS LIST...................................................................................................... 7 WARRANTY.................................................................................................…. 8 ORDERING PARTS....................





Categoría