Right hinge standard. **** Door Hardware not included. A-42 The Model A-42 is skillfully designed with a 90 degree left/right, industry standard 42-inch, ventilated steel swivel board, giving flexibility in confined areas like corners in the laundry room or kitchen. Its easy 4-inch height adjustment automatically returns to its normal ironing board position every time the board is put away. The solid-state silent timer, premium sized hot iron storage compartment, built-in work light, storage

Before using your iron with the steam function for the first time, we recommend that you operate it in a horizontal position for a few moments, away from your linen, i.e. press several times on the Burst of Steam button . STEAM IRONING Turbo Pro Read these instructions carefully and make sure you keep them. HELPLINE : FOR ANY PROBLEMS OR QUERIES, PLEASE TELEPHONE 0845 602 1454 (UK - calls charged at local rate) or (01) 47 51947 (Ireland) 1 YOUR STEAM IRON Instructions for use B. Spray button D.

• If you lower the thermostat, wait until the light goes out and comes on again before ironing. ! AUTO-STOP SAFETY FEATURE 3 (depending on the model) The electronic system cuts the power off and the auto-stop warning light (L) flashes if the iron is left vertically on its heel for more than 8 minutes or for more than 30 seconds if left horizontal. To restart the iron, shake it gently until the warning light stops flashing. NB. When the auto-stop safety switch operates, the thermostat light will

10-Iron stand 11-Insulating ironing mat • To change the setting from “Min” to “Max”, turn the thermostat control anti-clockwise. • Set the thermostat control (D) according to the table below. • The thermostat indicator light will come on (E). It goes out when the soleplate has reached the required temperature. • Position the iron stand, ideally on the corner of the mat (A). During any pause in ironing, always put your iron on its stand, never leave it on its soleplate on the mat. English047256 -

• If the electrical cord becomes damaged, it must be immediately replaced by an Approved Service Centre to avoid any danger. • The appliance should not be used if it has fallen, if it has obvious damage, if it leaks or has functional anomalies. Never dismantle your appliance : have it inspected by an Approved Service Centre, so as to avoid any danger. • Never immerse your iron in water ! • Do not unplug your appliance by pulling on the cord.Always unplug your appliance: before filling or rinsing

- Take the iron in one hand and tilt it slightly, soleplate downwards (D). - To open the water tank stopper, turn it anticlockwise until the arrow on the stopper points to the “open padlock” symbol (B). It will lift automatically. - Fill the tank up to the “MAX” line (D). - Re-close the tank stopper (C).To close the stopper, align the arrow with the “open padlock” symbol then turn it clockwise until the arrow is aligned with the “closed padlock” symbol. - You can now plug in your iron. Choose yo

Anti-drip function “Thermo-Alert” function (depending on model) - The “Thermo-Alert” light (O) comes on when you choose a program requiring a lower temperature (for example, changing from program 8 to program 6). It remains lit while the soleplate temperature is too high. - When it goes out, you can iron without risk of burning the fabric. O N 2- DRY IRONING - Choose your ironing program. - Set the steam control to DRY (see diagram A). - You may start ironing when the thermostat light goes out.

1. Press the on/off switch and disconnect the generator from the mains. 2. Slowly unscrew the boiler cap. 3. Using a water jug, fill with maximum one 1/2 litre of water. 4. Fill the boiler, taking care that the water does not spill over. If this occurs, remove the excess water. Replace the boiler cap, screwing on tightly, reconnect your generator to the mains, and switch it on. 5.Wait until the boiler heats up (about 4 minutes). The generator and the iron are ready to use when both the iron’s th

25 Important recommendations Safety instructions • Please read these instructions carefully before first use. This product has been designed for domestic use only. Any commercial use, inappropriate use or failure to comply with the instructions, the manufacturer accepts no responsibility and the guarantee will not apply. • For your safety, this appliance conforms to the applicable standards and regulations (Low Voltage, Electomagnetic Compatibility, Environmental Directives, as applicable...

Thermostat control For choosing the ironing temperature English017110 - 04/03Please read these instructions carefully and keep for future reference. ULTRAGLISS DIFFUSION What water to use ? Your appliance has been designed to function with tap water. However, it is necessary to operate the Self-Clean function regularly in order to eliminate hard water deposits. If your water is very hard (check with your water authority), it is possible to mix tap water with store-bought demineralized water in t