1. Coloque la plancha en el soporte. 2. Oprima hacia abajo el boton del vapor. 3. Oprima el boton de control de la temperatura hasta que destelle la luz indicadora de la temperatura deseada. • El ajuste de la temperatura no puede ser cambiado a menos de que la plancha este en el soporte. • Consulte la Guia de Telas (incluida a continuacion) para seleccionar el ajuste apropiado de temperatura. • Las planchas se calientan mas rapidamente que lo que se enfrian, de modo que comience con un ajuste de

Please note that youcan also achieve continuous steam in the vertical position. Ironing With Steam •Make sure that the Steam Station is unplugged from the power source. •Set the variable steam control (2) TO “0”. (Fig. 3) •Fill the water tank (8A) with tap water, following the instructions for filling the water tank. •Make sure that the iron is resting on top of the rubber mat (10). IMPORTANT: Do not place the rubber mat (10) on a table or any other surface which may be damaged by heat. •Plug t

: 1 (800) 798-7398 OWNER’S MANUALModel EP924H120V., 60 Hz, 1550 WattsSTEAM CLEANER WITH STEAM GENERATOR IRON 17 Model EP924H OWNERSHIP REGISTRATION CARD Printed in 1 YEAR LIMITED WARRANTYYour Steam Cleaner is warranted to be free from defects in material and workmanship for a period of one (1) year from the date of purchase when utilized for normal household use by the originalpurchaser only. The included Warranty Registration Card must befilled out and returned within 10 days of purchase. This

Now pull the fabric of the pants tight to avoid false creases. 3. Push the tensioning arm downwards. 4. Insert the electrical plug into the socket. Push In the thermostat knob. The control lamp should now light and the heat-up period will start. As soon as the press reaches the correct working temperature, the thermostat will automatically act to switch off the heating current. The pressing cycle lasts approximately 30 minutes. Important: Always disconnect the-pants press from the electrical

(see fig. 1) • Place the iron horizontally and open the Water Filling Inlet Cover (6). Pour water into the water filling inlet (6) to a maximum of approximately 8 oz. (230ml). Use the water bottle with the spout for this purpose. (see fig. 2) • Close the water filling inlet cover (6). Fig. 2 Fig. 1Cordless PositionTo Iron WithoutA Cord IRONING WITH STEAM • Make sure iron is unplugged from power source. • Set the variable steam control to ‘0’ . • Fill the iron with water following the instruction

Please review the product warranty and mail the registration form. EURO-PRO LLC: 21 Lawrence Paquette Drive, New York 4400 Bois Franc, St. Tel. : (800) 2- IN-1 Cordless/Corded Iron Model EP484 FOR THE WAY YOU LIVE IMPORTANT SAFEGUARDS When using your iron, basic safety precautions should always be followed, including the following: 1. Read all instructions before using the iron. 2. Use iron only for its intended use. 3. To protect against a risk of electrical shock, do not immerse iron or stand

6. Set variable steam control to " 0". 7. Allow iron to cool in an upright position before storing. WARNING! Use caution when emptying the iron. Burns may occur from touching hot metal surfaces, hot water or steam. 7 STORAGE 1. Always turn the variable steam control to “0” after you have emptied the water tank. 2. Allow the iron to cool down. 3. Always store the iron in the upright position to protect the soleplate. 4. From time to time, clean the exterior of the iron with a damp cloth and wipe

Do not use on soft plastics,unsealed wood and cold glass. On surfaces that have been treated with wax or some no wax floors, the sheen may be removed by the heat and steam action. Do not use on unsealed wood. This could cause the wood grain to rise. It is therefore recommended to test an isolated area of the surface tobe cleaned before proceeding. 4 FEATURES Cleaning BonnetAttaching the HoseTo attach the hose to the concentrator nozzle, align the two guide pins inside the hose/unit connector wit

Proof of purchase dateand $ 9.95to cover the cost of return shipping and handling must be included. * The liability of EURO-PRO Operating LLCis limited solely to the cost of the repair or replacement of the unit at our option. This warranty does not cover normal wear of parts and does not apply toany unit that has been tampered with or used for comercial purpose. This limted waranty does not cover damage caused by misuse, abuse, negligent handling or damage due to faulty packaging ormishandling

• Water tank may be empty or water level is very low. Add water. • Make sure that the temperature control dial and the variable steam control are correctly set. Formaximum steam, (setting " Max" on steam control), temperature control dial should be set on "• •• ". • Adjustable steam control is set on " 0". Always allow the iron to reach the selected temperature with the adjustable steam control setting at "0". Make sure the temperature control dial is set in the correct steam area, e.g. " • ", a