The battery status indicators change colors to represent different battery conditions, as noted in Table 1. BATTERY 1 POWER BATTERY 2 Figure 1. Status Indicators Table 1: Status Indicator States Indicator Condition Status Comments Power OFF AC Adapter not connected 1 Blinks at rate of one second on, one second off. 2 Standby state occurs when one of the two battery packs inserted is waiting to be charged. If the charger or battery pack you inserted is defective, remove the battery pack,

We strongly recommend that you read this guide before using the battery charger even if you are already familiar with computers. BATTERY CHARGER COMPONENTS Battery Battery Connector 1 Connector 2 Power Indicator LED Charge Indicator LEDs AC Adapter Connector Figure 1. Battery Charger Components Power Indicator LED The Power Indicator LED is on when power is being supplied from an AC adapter. 1 • Depending upon the configuration of your battery charger, it may or may not come with an AC Adapter.

This prevents the battery pack from being overcharged. ¦ When you remove the battery pack from your pen tablet, always insert a charged battery pack in the pen tablet to replace the one that you removed, or apply DC power. ¦ The FMW51BP1, FMW29BP1, FMW29BP2, FMW43BP2 and FPCBP48 battery packs use lithium ion battery cells which have no “memory effect.” You do not need to completely discharge or “condition” the battery pack before charging. Battery Pack Charge Time The approximate maximum amount

When two battery packs are installed, the pack installed first is charged first. Caution UL Notice: FMW51BC1 / FMW51BC2 External Battery Charger This battery charger is compatible with the following battery packs: ¦ FMW51BP1 battery pack ¦ FMW29BP2 battery pack ¦ FMW29BP1 battery pack ¦ FMW43BP2 battery pack ¦ FPCBP48 battery pack 58-0581-01.fm Page 2 Tuesday, August 21, 2001 9:28 AM Using the Battery Charger To charge your battery pack(s) in the external battery charger: 1. Connect an FPC DC po