NO. PART NO. QTY. description REF. NO. PART NO. QTY. DESCRIPTION 1 23912 2 Cart Body 16 47189 16 Nylock Nut, 1/4-20 2 24906 1 Front Panel 17 43814 12 Truss Head Bolt, 5/16-18 x 3/4" 3 62458 1 Tailgate Reinforcement Bracket 18 47810 13 Nylock Nut, 5/16-16 4 24907 1 Tailgate 19 43009 4 Washer 5 23548 2 Tailgate Guide 20 43010 2 Cotter Pin 6 24896 1 Axle 21 23353 1 Hitch Pin 7 44456 2 Wheel 22 43001 2 Hex Bolt, 3/8-16 x 1" 8 65426 1 Rear Tongue 23 HA21362 5 Nylock Nut, 3/8-16 9 23506 1 Whe

Ajuste las tuercas. Vea la figura 9. 18. Ensamble la empunadura sobre el extremo de la manija elevadora. Vea la figura 9. OPERACION / AJUSTE Una extraccion regular de la paja es critica para el mantenimiento de una cesped saludable. La paja es una capa de tallos, recortes, plantas rastreras, raices y hojas que no se han secado todavia. Una acumulacion excesiva de paja impide que el aire, agua y fertilizante lleguen a las raices. El extractor de paja efectivamente extrae la paja excesiva de su ce

NO. PART QTY. DESCRIPTION REF. NO. PART NO. QTY. DESCRIPTION 1 24597 1 Tray 17 23914 2 Arm, Hitch Mount 2 24594 1 Plate, Lift 18 23442 3 Bracket, Hitch Arm Mount 3 25429 12 Disk, Spike 19 43021 2 Wheel 4 45148 12 Hub, Spike Disk 20 43029 2 Bolt, Shoulder 5 23708 9 Spacer, 2.13" Long 21 23826 4 Bracket, Angle 6 46838 10 Spacer, 1/2" Long 22 HA21362 2 Nut, Nylock 3/8-16 7 24598 1 Axle 23 44180 2 Bolt, Hex 5/16-18 x 2" 8 24599 2 End Plate 24 43840 2 Bolt, Hex 5/16-18 x 1-1/4" 9 43501 2 Cot

NO. PART NO. QTY. DESCRIPTION 1 65063 1 Hitch Assembly 6 43001 24 Hex Bolt, 3/8-16 x 1" 2 64780 1 Rake Pivot Assembly 7 43343 1 Hair Cotter Pin, 1/8" 3 25165 24 Rake Tine 8 48968 1 Slotted Hex Nut, 1"-8 4 48978 1 Pivot Pin 9 46855 1 Cotter Pin, 3/16" x 2" 5 HA21362 24 Hex Nut, 3/8-16 (Nylock) 49419 1 Owner's Manual Speed Part the fastest way to purchase parts 7

45-0358 BOX SCRAPER ATTACHMENT REF. NO. PART NO. QTY. DESCRIPTION REF. NO. PART NO. QTY. DESCRIPTION 1 47134 4 Haircotter Pin, 6 25193 1 Weight Tray 0.08" x 1.58" Lg. 7 43001 5 Hex Bolt, 3/8" x 1" Lg. 2 44049 4 Clevis Pin, 1/2" x 1-1/4" Lg. 8 HA21362 5 Hex Nut, Nylock, 3/8" 3 712-3083 1 Hex Nut, Nylock, 1/2" 9 25166 4 Scarifier Tooth 4 45100 1 Hex Bolt, 1/2" x 4" Lg. 48972 1 Owners Manual (not shown) 5 64771 1 Box Scraper Assembly Speed Part the fastest way to purchase parts 7

It will stay in the raised position. To release the parking brake, depress and release the clutch-brake pedal while pushing down on the parking brake knob. The parking brake must be set if the operator leaves the seat with the engine running. See Figure 12. Figure 12 Relief Valve A hydrostatic relief valve is provided so the unit can be moved without the engine running. The lever which operates the relief valve is located in the rear of the tractor between the wheels. See Figure 13. To operate t

If a spark arrester is used, it should be maintained in effective working order by the operator. In the State of California the above is required by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. A spark arrester for the muffler is available through your nearest engine authorized service dealer or contact the service department, P.O. Box 361131 Cleveland, Ohio 44136-0019. MTD LLC, P.O. BOX 361131 CLEVELAND, OHI

• Safety • Assembly • Operation • Maintenance • Parts PRINTED IN U.S.A. FORM NO. 49526 (2/05) Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. IMPORTANT - READ THIS FIRST!!! For Missing Parts or Assembly Questions Please Call 866-576-8388 Mon.-Fri. 7 am - 5 pm CST. FAX 217-728-2032 or e-mail info@agri-fab.com Missing parts will be sent UPS in 24 hours directly to your home. TABLE OF CONTENTS SAFETY RULES..........................................................2 FULL SIZE HARDWARE CHART.

Fasten the end plates to the corners of the tray using eight 5/16" x 3/4" hex bolts and 5/16" nylock nuts. Do not tighten till step 18. FIGURE 10 16. Place the lift handle through the slot in the tray. Fasten the lift handle to the smaller, inner hole in the middle wheel bracket using the bolt and nut which you pre- assembled earlier (figure 2). Fasten the lift handle to the larger, outer hole in the wheel bracket using a 3/8" x 1-1/4" hex bolt, the shoulder spacer, and a 3/8" nylock nut. Tighte