Sicherungsfeder 1. Supports de roue 2. Barre de reglage 3. Boulon d’epaulement 4. Rondelle 5. Ecrou de blocage 6. Axe d’articulation 7. Arret a ressort Eng F ASSEMBLE GAUGE WHEELS The gauge wheels are designed to keep the mower deck in proper position when operating mower. Be sure they are properly adjusted to ensure optimum mower performance. • Slide adjusting bar down into bracket channel, Be sure that adjusting bar aligning holes are on top. Assemble gauge wheels as shown using shoulder bolts

Insert the nuts into the lower handle wing knobs. (A1) 2. Place the hole in the lower handle over the end of the tie rod (A) 3. Place the washer and wing knob onto the end of the tie rod and firmly tighten. (A) 4. Repeat on the other side. Assembly of Upper Handles to Lower Handles. 1. Insert the nuts into the upper handle wing knobs. (B1) 2. Ensure the upper handle and the lower handle are aligned correctly. (B) 3. Fit the bolts, washers and wing knobs..(B) 4. Fit the cable to the handles with

(f) The machine has not been used for hire. (g) The machine is owned by the original purchaser. (h) The machine has not been used commercially. * This guarantee is additional to, and in no way diminishes the customers statutory rights. Failures due to the following are not covered, therefore it is important that you read the instructions contained in this Operator's Manual and understand how to operate and maintain your machine: Failures not covered by guarantee * Replacing worn or damaged blade

Box 6569 Rodelokka Tecumseh Deutschland GmbH 4602 Kristiansand S D - Germany N-0501, Oslo Virmondstr. 137 Norway Briggs & Stratton Germany GmbH Tel: (47) 23 23 48 20 47887 Willich-Neersen Tel: (47) 380 96028 Schwetziner Str. 19 Fax: (47) 22 385832 Germany Fax: (47) 380 95031 D-68519 Viernheim Tel: (49) 21 56 9588 0 Tel: (49) 6204 60010 SF - Finland Fax: (49) 21 56 9588 18 SF - Finland Fax: (49) 6204 600180/600181 Oy. Promotor AB Oy Inter-Motor Ab Sahaajankatu 41 F - France Laivanrakentajantie 2

• Do NOT dispose of battery to water. • Do NOT incinerate DISPOSAL OF FUELS AND LUBRICATING OILS • Wear protective clothing when handling any fuels and lubricants. • Avoid contact with skin. • Remove petrol and engine oil before transporting the product. • Contact your local authority for information of your nearest Recycling/Disposal Station. • Do NOT dispose of used fuels/oils with household waste • Waste fuels/oils are harmful, but can be recycled and should be disposed of through the recogni

To obtain further information contact your dealer as detailed below Briggs and Stratton A list of authorised Briggs and Stratton Service Dealers is given on the back of this book. SERVICE RECOMMENDATIONS 1. We strongly recommend that your product is serviced at least every twelve months, more often in a professional application. 2. Always use genuine Spare Parts. 3. Prepacked spares are available from most authorised stockists. 4. Your product is identified by a silver and black product rating l

Arandela x 2 7. Perno x 2 8. Empunadura inferior 9. Montaje del enganche 10.Clips de retencion del mango inferior x2 11.Pernos del mango inferior x2 12.Manilla de arranque 13.Tapa del tanque de combustibles 14.Tapon de llenado de aceite 15.Tapon de combustible 16.Cable de la bujia 17.Etiqueta indicadora del producto 18.Etiqueta de Advertencia 19.Manual de Instrucciones ES - Bastidor de las ruedas 20.Empunadura inferior 21.Ruedas x 2 22.Tubos telescopicos superiores 23.Pasador del tubo telescopic

Operator Presence Control 2. Choke Control Lever 3. Upper Handle 4. Cable Tie Wrap x 2 5. Handle Knob x 2 6. Washer x 2 7. Bolt x2 8. Lower Handle 9. Hook Assembly 10.Lower Handle Retaining Clip x2 11.Lower Handle Pin x2 12.Starting Handle 13.Fuel Tank Cap 14.Oil Filler Cap 15.Fuel Tap 16.Spark Plug Lead 17.Rating Label 18.Warning Label 19.Instruction Booklet GB - Wheel Frame 20.Lower Handle 21.Wheels x 2 22.Upper telescopic tubes 23.Telescopic tube pin 24.Telescopic tube retaining clip 25.Lower