Faire gliseer le Ioquet du mode accessoire (B) vers ta droite. Fixer Vaccessoire au tuyau (voir la section <
9 WASH AND DRY Step on Nozzle Setting pedal if necessary to switch from HARD FLOOR DRY VAC to WET SCRUB & VAC position. Slide Brush On/Off switch to the ON position. Pull Solution Trigger to start the flow of cleaning solution. NOTE; Cleaner will continuously dispense solution until Solution Trigger is released. RNING To r, uce _1: the risk of unplug Injury before from IMPOI hard 4T: When changing between nd carpet cleaning modes, use the correct nozzle: ;leaning -tangerine nozzle ning -green be
_Squeeze filter frame (A) and pull it out until it stops. Do not completely remove frame. Wipe debris off filter. Slide filter back in place. Empty solution tank and rinse thoroughly. Let air dry. Place empty solution tank on carpet cleaner. Turn carpet cleaner ON. Squeeze trigger and push carpet cleaner forward and back several times. This will clear any solution remaining inside the cleaner. Empty recovery tank, rinse thoroughly and let air dry. Remove water from the hose (see "After using too
Read it thoroughly before operating the machine. This product is intended for commercial use only. PARTS AND SERVICE Repairs, when required, should be performed by your Authorized Nilfisk Service Center, who employs factory trained service personnel, and maintains an inventory of Nilfisk original replacement parts and accessories. Call the NILFISK DEALER named below for repairs or service. Please specify the Model and Serial Number when discussing your machine. (Dealer, affix service sticke
Then turn the power switch Off (O) and unplug the machine. 12 Push the machine to a designated waste water “DISPOSAL SITE” and empty the recovery tank. To empty, pull the Recovery Tank Drain Hose (12) from its rear storage hanger, then remove the plug (hold the end of the hose above the water level in the tank to avoid sudden, uncontrolled flow of waste water). Refill the solution tank and continue cleaning. USING ATTACHMENTS To use accessory tools, disconnect the recovery hose at the Recover
The right accessories not only enable the cleaning job to be done in the fastest and most efficient way, they also help to prevent damage to the machine and reduce maintenance cost. All products carrying the Nilfisk-Advance label have been fully tested and are guaranteed for use with our equipment. Specifications and details are subject to change without prior notice. Nilfisk-Advance A/S Sognevej 25 DK-2605 Brondby Denmark Tel.: +45 4323 8100 Fax: +45 4343 7700 96020906-09, © 2005/09 Nilfisk-Adv
• Quality design and first-class engineering saves water and chemicals • State-of-the-art moisture recovery speeds up drying time • Durable construction for long-life Rotating brush for deep cleaning Rugged aluminium vacuum shoe for excellent water recovery Rotating brush for deep cleaning Rugged aluminium vacuum shoe for excellent water recovery AX 310/410 – the newest and most modern options in carpet cleaning The control panel is simple to understand and easy to use AX 310 is an economically
2 MANUAL PURPOSE AND CONTENTS ........................................................................................................... 2 TARGET ........................................................................................................................................................... 2 HOW TO KEEP THIS MANUAL ....................................................................................................................... 2 IDENTIFICATION DATA .............................
2 MANUAL PURPOSE AND CONTENTS ........................................................................................................... 2 TARGET ........................................................................................................................................................... 2 HOW TO KEEP THIS MANUAL ....................................................................................................................... 2 IDENTIFICATION DATA .............................
Ing. Wolfgang Nieuwkamp Tests and approvals ALTO Deutschland GmbH Guido-Oberdorfer-Straße 2-8 D-89287 Bellenberg Bellenberg, 2007-01-02 103 Nilfisk ALTO Why Compromise HEADQUARTER DENMARK Nilfisk-Advance Group Sognevej 25 2605 Brandby Denmark Tel.: (+45) 43 23 81 00 Fax: (+45) 43 43 77 00 E-mail: mail@nilflsk-advance.dk SALES COMPANIES AUSTRALIA Nilfisk-ALTO 48 Egerton St. PO box 6046 Silverwater NSW 2128 Australia Tel.: (+61) 2 8748 5966 Fax: (+61) 2 8748 5960 AUSTRIA Nilfisk-Ad